Discuss 3 Pole Switch Wiring Question in the Lighting Forum area at ElectriciansForums.net

Matthe1

DIY
Reaction score
0
1FD55CB1-53DE-4000-B509-A6B9063D5CFC.jpeg
Trying to replace this existing 3 pole switch with a smart 3 pole switch, am I identifying these wires correctly? It appears there’s an expectation for fives wires including two traveller wires so is it likely the two blue are both travellers in which case am I missing a ground wire?

Help would be appreciated.
 
Best wait for an American set of eyes, but at a guess from over the pond, the green will be ground, the two blues are both travellers, and the black is live (or switched live) There may not be a neutral there at all.
Is this a 2 way switch? As in one light controlled by two switches?

can you show the connections of your smart switch, or the wiring diagram supplied with it? You may have the type that doesn’t need a neutral to work
 
Yes, it’s one light controlled by two switches.

The smart switch does call for a neutral.


71X0djCqFbL._SL1500_86380eea-ad96-4ad9-ba30-e03709a8c17d_300x300.jpg
 
doubt that the smart switch will work unless you can get a neutral to it. there are smart switches available that don't require a neutral.
 
This works with this set up so the one most likely is the neutral wire, however I’m still concerned that something isn’t correct as there’s only one traveller wire connected.

Is it possible there’s only a need for a single traveller wire or is it more likely it’s missing a ground wire?
 
if you've got it working, it's most likely that you have it connected across hot and ground. that is verboten.
 
This is the concern. Ok, do what would be the correction needed for this? And why is it ‘working’?

Worth noting I did test the wires and only the bottom blue and black where ‘hot’ hence my assumption the top blue was the ground.
 
Last edited:
Highly unlikely the blue you have marked as ground is ground unless it has been repurposed (have you tagged them). Neutral is normally white or grey.
 
It is possible that is ground but it needs testing to be certain, same with the neutral. The most obvious colour for ground is the green but that may not be the case.
 

Reply to 3 Pole Switch Wiring Question in the Lighting Forum area at ElectriciansForums.net

Similar Threads

Hi, I’m new to the forum. Thanks for letting me join. Asking for some diy advicd… I’m trying to add a couple more security lights to the existing...
Replies
1
Views
679
Hello, I'm replacing standard light switches in my hall and landing with touch switches (not smart, just touch on/off) like these from Amazon...
Replies
7
Views
708
Looking for counsel / guidance to replace an original Dayton On/off with speed control switch. I’ve checked with a couple local electrical supply...
Replies
5
Views
728
FYI --- This is a U.S. installation. I'm replacing a three way switch (the UK might more sensibly call it a two way switch??) with a Kasa Smart...
Replies
4
Views
804
This weekend I was replacing a hall light fixture in my old home (rewired circa 1980/90's) and noticed the work was done using one of the exposed...
Replies
1
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock