OP
Raptor0014
Esteemed
- Reaction score
- 1,261
Intention is to fit a 100A 100ma Time delayed Type A TP&N isolator.
Picked up this MCG one today.
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter Raptor0014
- Start date
Discuss Advice regarding isolator for 3ph TT system in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Picked up this MCG one today.
- Reaction score
- 25,510
All insulated DBs I wouldn't be putting in a main switch rcd just fit a four pole DNO style switch.
OP
Raptor0014
Esteemed
- Reaction score
- 1,261
I initially was going to do that but one of the DB's needs to be replaced so will be a metal one.
Reply to Advice regarding isolator for 3ph TT system in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
I have a scenario where there is a three phase DB in a commercial property where there are mixture of three phase and single phase washing...
Anyone come across this before? I was asked to do a Zs on a 3ph surge device; L1 was around 6 ohm, L2 & L3 around 0.11. Wired in singles from a...
Hello,
Looking for some advice following a botched 3 phase upgrade today. Some background:
Commercial unit originally fitted out (4 years ago)...
Carrying out a EICR in a commercial setting. In the main intake room the DNO supply comes in and it states clearly this is a PME system. 5 years...
When I joined this forum a decade or so back, there was a discussion going on about a welder that was connected with a 3-core cable to L1, L2 and...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Wiring a light and a battery pack, basic questionsHello Complete lack of electrical knowledge here. I sew actually, making a costume right now...
- Latest: dragunonov
-
Need Help with wiring circuit for lightsGood Morning need some advice please. Yesterday went to change a light fitting in hallway. There...
- Latest: noexpert
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.