Discuss Am i quoting too cheap in the UK Electrical Forum area at ElectriciansForums.net

A

axel132132

Hi,

I have done two jobs recently and both times they have both said WOW how cheap.. so im guessing im quoting too little - How much would you guys roughly charge for these two jobs (With the details given) both down in surrey

Job 1.

Install Alarm with 2 Sensors and a Door Sensor + bellbox + keypad - Involved taking up a few floorboards upstairs to wire for sensors, involved just taking cable up into loft up cupboards all way up and keypad is just other side of panel - Spur next to panel fed from sockets.

Install 3 outside lights with switch - wiring outside approx 5meters between lights and switch aswell like O ----5m---- O ----5m---- O ----5m----SW

Extend 2 x sky cables 50meters on outside of house, drill through to back of TV

Job 2.

Wire an external SHED

Mainsboard in house needs Crabtree RCBO, take 6mm 3-core armoured up through boxing (Drilled outside) and clipped outside along wooden fence wall, up back of shed and inside shed (Shed about 30cm from fence). To a 3 way consumer unit.. Out of consumer unit to 5 double sockets needing surface back boxes

Sockets length about 10 meters total cable length
Armoured length about 30 meters

Just a rough estimate plzz and ill tell you how much i quoted and did the jobs for i thought i made enough so was happy but just wondering if im way too cheap and can make a little extra cash.
 
that's not bad, then. but that's a lowish estimate. should maybe add a bit on top for unforseen snags. i generally use hybrid alarms. wireless detectors with just the bell and keypad hard wired.
 

Reply to Am i quoting too cheap in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Ok i may get slated for this one but here goes; A bit of background info first. Its been a while since ive looked at my iee regs, and ive not...
Replies
12
Views
2K
Good afternoon all, today I experienced a near death electric shock. This happened on a single phase domestic property! I was carrying out a few...
Replies
15
Views
3K
  • Locked
  • Sticky
Beware a little long. I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Replies
55
Views
5K
Morning All I recently completed my first re wire and board change, (with help from the owner who is a gas fitter and plumper, who works with my...
Replies
0
Views
1K
Hi Guys I have been following this forum over a number of years reading endless discussions and picking up things along the way. I am a JIB gold...
Replies
9
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock