UK Am2 Breaker Selection

[CokeCanBrad]

Hi I want too do my AM2 In the future. I want too know the breaker selection for the circuits in the AM2, an acceptable answer (for me.) will be from a recent am2 Passee (successful candidates only.).
The circuits are as Follows:-

D.O.L Starter, with motor.

Carbon Monoxide Detector

Ring Final Circuit with a spur off to an additional outdoor socket this one will need additional protection RCD OR RCBO?.

16 amp TPNE Socket (Its the red 3 phase commando socket.)

2-way and Intermediate Lighting (I know 6 amp but rcd or b type or rcbo?.)

S- plan heating circuit with solar heating added too it.

Kind regards COKECANBRAD

 

[Ed Evans]

Are you 100% sure on that? In the candidate checklist i went through the second thing on the composite installation was selection of protective devices, so how are you proving you know how to do that if they just tell you on a wiring diagram?

Hi, From an AM2 assessor, the cb,s are listed on the front of the distboard and in the spec hung on the wall in the tarrifolds

 

[Ed Evans]

the sizes and types are on the front of the dist board and in the tarifolds hung on the wall in the bays.

From an AM2 assessor

 

[Ed Evans]

the sizes and types are on the front of the dist board and in the tarifolds hung on the wall in the bays.

From an AM2 assessor

I can send you a picture if you wish