Aico Carbon Monoxide Detectors
This official sponsor may provide discounts for members

Discuss AM2 Testing question, R1+R2 results in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

So im currently doing my AM2 and doing the testing, I understand that this is simple, but when writing down the R1+R2 on the certificate, do I need to put the highest reading down? Theres a ring circuit eith 4 sockets on it l, however one of the sockets is a spur - which obviously has the higher R1+R2 reading, the readings I got were 0.04, 0.05, 0.06 and I got 0.12 for the socket spur, does that mean I have to put the reading I got for the spur in my certificate or do I take the highest reading from one of the sockets in the ring?
 
Aico 3000 Range
This official sponsor may provide discounts for members

Andy5678

-
Arms
Esteemed
You must be logged in to see the message.
 

Reply to AM2 Testing question, R1+R2 results in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Top Bottom