Anyone help me out with a MEMERA 21 CU Cover

[charlie76]

Evening all. On a job today i've cracked the front of the customers consumer unit because some muppet has put an overly deep MCB in which clashes with the front cover. I hadn't noticed initially as they had obviously not tightened the screws fully previously. I was putting the cover back on cranked the screw up and pop, out dropped the front.

I wondered if anyone had in their van / shed or under their bed a cover for a MEMERA 21 consumer unit. Would be most appreciated and I will chuck you a few quid and postage via PayPal or bank transfer or something.

Cheers.

 

[Leesparkykent]

IIRC its the same board I'm ripping out tomorrow. How many ways is it?

 

[Flanders]

Sorry know but can you not repair it some super glue ?

 

[charlie76]

IIRC its the same board I'm ripping out tomorrow. How many ways is it?

You gotta be kidding . Its an 8 way. If you have a 40A type B MCB in it also I could do with replacing the offending MCB which bust the front of this one.

 

[charlie76]

Sorry know but can you not repair it some super glue ?

Yea, could do. Had none with me and was end of the day, tired, hungry, wanted to get home so said my apologies, made it safe and told the customer I would get a replacement. Just thought I would chance it on here and do a proper job.

 

[Leesparkykent]

You gotta be kidding . Its an 8 way. If you have a 40A type B MCB in it also I could do with replacing the offending MCB which bust the front of this one.

Charlie if it turns out to be the same make/number of ways ill let you know tomorrow and ill send it to you.

 

[charlie76]

Charlie if it turns out to be the same make/number of ways ill let you know tomorrow and ill send it to you.

Your a star cheers mate. Well....you will be if it is the same one.

 

[Octopus]

I may have one of those in my "store" - so if Lee can't oblige, PM me and I'll take a look

 

[charlie76]

Charlie if it turns out to be the same make/number of ways ill let you know tomorrow and ill send it to you.

Hi Lee. Did it turn out to be the mem CU you were stripping out?