Just looking for some opinions on how best to price some remedials on an EICR that has been done recently. I didn’t carry out the report but do have access to it. It’s a big warehouse with numerous final dbs so there’s quite a lot of paperwork which will take some going through.
There are quite a few c2’s stating that wrong sized mcbs have been used for the ccc of a the cable. Mostly 32a for 1.5mm. It could easily be a case of just swapping the mcb out for a smaller size but then equally they could be in to cope with a greater loads or higher inrush currents which would then need further remedial work.
What’s would you say the best way to price this is? I’m leaning towards an estimate/hourly rate as there may be more to it than simply just swapping out mcbs.
There are quite a few c2’s stating that wrong sized mcbs have been used for the ccc of a the cable. Mostly 32a for 1.5mm. It could easily be a case of just swapping the mcb out for a smaller size but then equally they could be in to cope with a greater loads or higher inrush currents which would then need further remedial work.
What’s would you say the best way to price this is? I’m leaning towards an estimate/hourly rate as there may be more to it than simply just swapping out mcbs.
