- Reaction score
- -1
Hello all,
Just after some guidance, i am a qualified Auto Electrician with a good number of years behind me. While confident in my own ability in domestic applications i am not fully aware of the Regs.
I am planning on installing 3 or 4 (mind not made up yet) brick lights in my garden wall parallel with my drive.
I intend on running 1.5mm SWA along the wall clipped with SWA cleats which will be circa 400mm above the level of the soil in the garden looping in and out of wiska Junction Boxes with the correct earthed glands etc.
The question is am i then OK to run flex (maybe pond flex) from the junction box through the wall to the back of the brick light. The wall is 2 bricks thick (double thickness) i will use the correct glad on the flex.
(The picture below shows the lay out if it uploads ok.) Credit Google image search
Thank you
James.
Just after some guidance, i am a qualified Auto Electrician with a good number of years behind me. While confident in my own ability in domestic applications i am not fully aware of the Regs.
I am planning on installing 3 or 4 (mind not made up yet) brick lights in my garden wall parallel with my drive.
I intend on running 1.5mm SWA along the wall clipped with SWA cleats which will be circa 400mm above the level of the soil in the garden looping in and out of wiska Junction Boxes with the correct earthed glands etc.
The question is am i then OK to run flex (maybe pond flex) from the junction box through the wall to the back of the brick light. The wall is 2 bricks thick (double thickness) i will use the correct glad on the flex.
(The picture below shows the lay out if it uploads ok.) Credit Google image search
Thank you
James.