Note for installer
With respect to Part 2 item 4 of this Certificate, the omission of additional protection by 30 mA RCD for socket-outlets
(Regulation 411.3.3) and cables concealed in walls (Regulation 522.6.102), the person issuing this Certificate should be
aware that they are the designer of the work. Additional protection by RCD should only be omitted where the designer is
satisfied that this will not result in an increased risk of electric shock and that there is minimal risk of damage to the
circuit cable due to penetration by screws, nails and the like.
Note for customer
With respect to Part 2 item 4 of this Certificate, the installer (designer of the installation) may have decided to omit
additional protection by 30 mA RCD for socket-outlets and cables concealed in walls, where in their opinion this
omission will not result in an increased risk of electric shock.
In this case, an RCD is an automatic switching device installed to disconnect the supply when a person makes contact
with a live part.
The installer should have discussed the omission of the RCD with you before carrying out the work.
We don't have to stick an RCD on every minor works addition!