Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members

Discuss C/U Tails in wall - protection required in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

The existing C/U is at almost ceiling height in a room and the old tails are plastered in the wall below it before going outside to the meter cupboard (they have no protection and are just covered in plaster). The tails have to be upgraded when the C/U is replaced, so I could take the option of putting the new tails in 50mm trunking and fixing that to the wall, but the customer wants them hidden. I won't get the new tails deep enough to have 50mm clearance from the wall to them, so I need some protection from drills etc.

Any suggestions appreciated?
 
SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
D

Deleted member 26818

Use SWA with a switch fuse in the cabinet?
2 core with a separate earth for earthing/bonding or 3 core if a separate earth core is not wanted.
 

happysteve

-
Arms
Esteemed
 

Reply to C/U Tails in wall - protection required in the Electrical Forum area at ElectriciansForums.net

SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
Top Bottom