Discuss Couple of question about Can-bus ready LED's in the Auto Electrician Forum area at ElectriciansForums.net

Reaction score
0
Hello at present I drive a Vauxhall Vectra C 1.9cdti 16V 150bhp 56 plate.
I wish to add some extra lights to my vehicle, as in Angel Eyes (Halo rings) to my head lights, also some extra indicators to the door mirrors and possibly some LED strip lights to the headlights that also connect to the indicators.

My question is does anybody know if the factory fitted fuses can cope with the extra drain or do I need to add something or upgrade the fuses.

Sorry if it sounds strange or confusing.

Many Thanks in advance.
 
The fuses are there to protect your wiring from being overloaded so don't change them for higher rated ones. It could catch fire.....saying that, if it's a Vectra....it might be doing you a favour :). My main concern here is that the lights may be worth more than the car is....

If you do wish to do it then confirm your existing circuit loads, ideally a clamp meter or otherwise by calculating your existing loads in watts and converting to amps. Then you can work out what spare capacity you have. You may also need to consider your existing relays and if they can switch the additional load.
 
Last edited:

Reply to Couple of question about Can-bus ready LED's in the Auto Electrician Forum area at ElectriciansForums.net

Similar Threads

Hi Everyone, New to the forum but hoping I can find a little help with my restoration project... I am adding a secondary wiring "system" to my...
Replies
14
Views
897
We are in the process of renovating our house, and would like to setup led strip-lighting throughout. of the options, this seems most attractive...
Replies
4
Views
748
I have the typical LED on Dimmer switch. All the lights flicker in my house are very inconsistent times. By let me clarify by saying all the...
Replies
0
Views
893
Hi all, I'm planning on adding some lighting to an old stone shed, there's currently a 2.5mm² SWA supply to the shed only supplying one IP rated...
Replies
7
Views
1K
Looking for some cabling advice for my garden project. I’ve put together this diagram below, which hopefully explains what I’m trying to achieve...
Replies
5
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock