- Reaction score
- 213
I just get the apprentice to do it. 50 years in the trade and Ive only lost two ?
Discuss Cut-Out Fuse Question in the UK Electrical Forum area at ElectriciansForums.net
Off you goto work.Just to add that obviously if you do this sort of thing regularly or are going to tackle systems where arc-flash is likely then you should get the proper PPE. Often gloves have a rubber insulating inner and a leather outer for mechanical protection and the arc-flash rating. For example:
thanks for your advice and the links to the safety gear.Also to add don't were polyester/nylon, etc. but natrual fibers like cotton/wool/silk, and ideally a proper heat-resistant overall (again, you get arc-flash rated ones).
Synthetic material melt and sticks to your skin making any burn much harder for the medics to fix.
Bit OTT !! pair of pink marigolds and sunglasses is all that's needed. If it goes wrong shout,
Reply to Cut-Out Fuse Question in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.