Galaxy G2-12 Unset from Keypad

[Sc00by121]

Hello,

I have installed a Galaxy G2-12, one door contact, one PIR. Very simple set up and it all works fine however it won't unset from the keypad.

I see reference to 'Restrict Keypad' in the manual and see that the default is to require a single unset like a keyfob. I don't have keyfobs and need the panel to unset.

However my problem is that the menu does not tie in with the manual

It says in engineer mode go to item 51 (parameters) and then to 55 (DD243) and then 3 (restrict keypad) and then 0 for No.

I go to 51 but 55 says NOT USED.

Can anyone advise, I've been digging around the menu in depth and cannot find any reference to DD242 or Restrict Keypad

 

[Sc00by121]

Cancel that, I found it. I actually found a small addendum slip in the box about this exact setting which differs from the main manual. Completely different name and location within the menu. I must be on a different firmware version.

All working great now.