Hall of Shame Photos

[Wully]

On the back of a thread I started I thought I'd start this since there doesn't seem to be one and I'm sure we all have a right good few that would scare those in the know.

How many supplies does one need!

Cable Raggle Extra

Not so much Shame but old

Any idea of age?

 

[londonlec]

Yes, noticed that. Lots of discussion about that kind of thing - asked NICEIC inspector about it on last assessment - he said leave it alone. Asked him about requesting change to PME to overcome the problem - he reckoned TNS with 951 clamp and acceptable Ze is always preferable to PME. Who am I to disagree?

As far as I'm aware/concerned, that end of the earthing conductor is outside of our responsibility.

 

[filo]

Yes, I'll just just use a drill to make sure the clamp's tight

 

[Mr Mike]

View attachment 5231

A nice clean supply.......... I'll get my coat.

 

[Guest 004]

View attachment 5231

A nice clean supply.......... I'll get my coat.

yeah just enough space to fit the pc as well

 

[BOROROBBO]

buried in a wall behind some tiles..... nice!

what is that behind them green latex gloves? (i think the gloves are meant to act as insulation) oh dear!

oh its a ring main connector blocked together with a spur off to a double socket.

 

[telectrix]

well at least the terminals are accessible................................. with a hammer.

 

[BillyTheSparks]

Found this buried in the wall (it's for a boiler supply)



These two were for some light fittings in a shop. (The H&S bloke wired them)



Changed a cooker for a client, this is what I found behind the connector plate. The lady of the house wired it 5yrs previously

Brown tape for the earth

Cut pieces of pvc insulation to cover the over stripped inner insulation

Twist the earth back together as it's a bit too short!

 

[edrobbo8]

Those last pics are something else!!

 

[BOROROBBO]

meter was something like £19 in debt yet there was power at the CU. further investigation found this.... naughty!

 

[filo]

Should really have brown sleeving.
I suppose it's not too greedy - only 6mm2.

 

[Engineer54]

Are those Gizmo's still around that sent the metre backwards while using the free leccy?? The one's i remember where 2 16mm singles coming out of an epoxy filled plastic IP type box.... Think they just rammed the two tail into the meter cable connections ....very quickly, ...to minimise the splashing and arching that went with it!! ...lol!!!

 

[Mr Mike]

Are those Gizmo's still around that sent the metre backwards while using the free leccy?? The one's i remember where 2 16mm singles coming out of an epoxy filled plastic IP type box.... Think they just rammed the two tail into the meter cable connections ....very quickly, ...to minimise the splashing and arching that went with it!! ...lol!!!

I don't know, but I am lead to believe there is an "object" when applied to the metre will send it backwards, obviously not going to happen when the metre is upgraded. So he sends it back, noting the reading, then gets free electricity. He keeps good records so his bill rises slightly each year. He is in the trade btw.

 

[Engineer54]

NO ...not in the trade, just a friend of a friend situation really, and this was years ago now, none of these smart meters about then just the spinning wheel type ...lol!!! As far as i can remember he only used the thing weekends, but by the look of the flash marks on the meter cable cover, for a long time...lol!!! I would imagine any meter guy would have known what was going on from those flash marks as he whacked the cables in ....lol!!!

 

[Marvo]

Well it's about time I show you guys how it's done in Africa. Here's an installation I got called to today by the building management company. There's been a recent history of BMS fire alarm episodes where stairwell pressurisation fans for the block of flats above this retail premises has been causing an annoyance. This was the DB for the retail premises.











The DB main breaker looks like it was installed by a complete imbecile who had nothing in his toolbox apart from a hammer and chisel. After speaking to the tenant it turns out that the breaker has had a history of tripping for 'no apparent reason' over the last few months.

 

[Marvo]

As if this world class installation wasn't enough the electrician has been back a few times and eventually remedied the problem with these;





As an added bonus in the second photo you'll get a chance to check out his VFD wiring job.

 

[Engineer54]

Well it's about time I show you guys how it's done in Africa. Here's an installation I got called to today by the building management company. There's been a recent history of BMS fire alarm episodes where stairwell pressurisation fans for the block of flats above this retail premises has been causing an annoyance. This was the DB for the retail premises.





View attachment 9832

View attachment 9833

View attachment 9834

The DB main breaker looks like it was installed by a complete imbecile who had nothing in his toolbox apart from a hammer and chisel. After speaking to the tenant it turns out that the breaker has had a history of tripping for 'no apparent reason' over the last few months.

Now that's what you call crimping!! lol!! Nice cable dressing, excellent safe distribution system of the phases and neutral... what you complaining about Marvo?? lol!!

 

[Marvo]

I was pretty shell shocked by now and stupidly assumed I'd seen the worst. I was about to run a local test on the BMS fire detection and I was greeted by this;



At that point I'd seen enough. I put the testers and tools away and dragged out the camera.

I've also got some classic pictures of the rest of the DB if anyone's actually interested. Don't worry I completely understand if you've seen enough already.

 

[Marvo]

.. what you complaining about Marvo?? lol!!

Oh, I can only watch and learn from the pro's. Once you get past the main impact of the images you need to revisit them and enjoy some of the more subtle nuances and gems. My personal favourite is the labeling of the 'phase rotation' on the toilet extract fan.

 

[DNS1]

I love these threads... Makes me feel so much better about my work

 

[Engineer54]

I was pretty shell shocked by now and stupidly assumed I'd seen the worst. I was about to run a local test on the BMS fire detection and I was greeted by this;

View attachment 9837

At that point I'd seen enough. I put the testers and tools away and dragged out the camera.

I've also got some classic pictures of the rest of the DB if anyone's actually interested. Don't worry I completely understand if you've seen enough already.

NOW, ...That is a classic!!

Reckon that detector was causing someone some problems in the past...lol!! Rather than clean/blow out or replace it, stick a bag over it ... i'll have to remember that one ...lol!!!

 

[Marvo]

There's nothing wrong with it, the electrician 'installed' the bag on the fire detector because the heat or smoke from the DB below was causing it to alarm. After complaints from the other tenants about the noise of the pressurization fans in the stairwells this was his answer to the problem.

 

[SparkyDips]

Correct... Building regs

The Wiring Regs just state the accessory must be fit for purpose / location etc

no regulation, just a building reg I think

i believe its 300mm from the edges of the sink??

great thread guys.

 

[DNS1]

i believe its 300mm from the edges of the sink??

That's the "prefered" distance according to the OSG/Building Regs

 

[Knobhead]

There’s hope for me yet.
If I hadn’t got the correct crimper, I’d have got the gas torch out and sweated the lugs. What the hell did he use?

 

[Silly Sausage]

What the hell did he use?

It looks like the subtle use of a pair of bolt croppers to me.

 

[jase]

this just some of the faults on this job, u may need to look closely. If you have GOT to use trunking at least make it neat!

that looks like some of the crap that goes in on those "decent" homes schemes that are happening on council estates up and down the land

 

[Engineer54]

There's nothing wrong with it, the electrician 'installed' the bag on the fire detector because the heat or smoke from the DB below was causing it to alarm. After complaints from the other tenants about the noise of the pressurization fans in the stairwells this was his answer to the problem.

Well at least i was partly right, it was causing someone a problem, now the actual reason for it being a problem, ...is another classic!!! lol!!!

 

[Baker1988]

I must say i really like these picture even i wunt do this stuff and im not even fully qualified haha and I always thought that the building regs say that a socket has to be at least 500mm away from a sink

 

[SparkyDips]

sorry for pic size and quality

 

[Baker1988]

Well i guess thats me been wrong haha thanks for the clarification