- Reaction score
- 0
Hi, do Eaton Memshield mcb's fit previous version of Eaton split boards code (EAD32b) for example?
Discuss Hi, do Eaton Memshield mcb's fit the previous Eaton split load boards? in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 25,470
That code is for an Eaton mcb. Are these both Eaton boards or is one Memshield.
Reply to Hi, do Eaton Memshield mcb's fit the previous Eaton split load boards? in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
So here is the thing
Rhere is an old MEMSHIELD TPN+E Board that is pretty mich obsolete. The only place that sells their breakers would be Ebay...
See this time after time - poor installation:
new split load board on a re-wire tt installation. The main switch is not a time delay rcd. The...
evening everyone,
Just wanted to check if acti9 mcb's fit into isobar4 merlin gerin board. I have tried to do a bit of digging however i cant get...
I have a 40amp RCD downstream of a 50a MCB (10mm csa cable) should the MCB be lowered to protect the RCD from overload?
If so why does this not...
I had a call to a new customer who was experiencing what sounded like nuisance tripping on a kitchen ring.
Some background first.
It's an MK LN...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.