Currently reading:
honest answers....

Discuss honest answers.... in the UK Electrical Forum area at ElectriciansForums.net

I wasnt refering to your cheese wire thin pants Dee.. Lol ;).. Yeah t&e.! Watched a Electrical Trainee today stugling with the stripping knife! Its not as if ur pulling the earth through swa.. Its a soft plastic!!! Arghhhh
 
I wasnt refering to your cheese wire thin pants Dee.. Lol ;).. Yeah t&e.! Watched a Electrical Trainee today stugling with the stripping knife! Its not as if ur pulling the earth through swa.. Its a soft plastic!!! Arghhhh

My brother had years of experience pulling the twin+E cheese wire,then one day I distracted him and he pulled that cheese wire towards him,it snapped, a tiny bit was left in the cutters that hit him,it made sure he never had use of that eye again

Be carefull folks, if you do go cheese pulling,always strip away from you
 
up to 2.5mm i use the cpc. over that, longitudinal cut with sir stanley, then pull the cpc out.
 
Sorry to hear about your brother des56. I 100% agree along with every1 most likely that cutting knife is correct way! Just intresting to see who actually does

No problem,it never really bothered him,he can whip me in snooker with just the one
icon9.png
icon7.png
 
Always slice across then down and peel back. Was taught that way during my apprenticeship back in the 80's, and it's stuck with me.
That said, I don't have a problem with the cheese wire method, it's just that I was programmed the other way.
 
Cheese wire for anything up to about 6mm, but can depend on what the sheath is. Prysmian and you're fine, some other stuff can be tough as old boots!
 
Always slice across then down and peel back. Was taught that way during my apprenticeship back in the 80's, and it's stuck with me.
That said, I don't have a problem with the cheese wire method, it's just that I was programmed the other way.

As above, cut across, then down the line of the cpc and peel all the cores out together.

If there's good access and not too long a strip length, then one of these CK automatic strippers does both sheath and cores:
C.K Automatic Wire Stripper - 495001
 
Never mind a knife, proper cable is stripped with a FORK! (Or Joistripper/ZSU/etc)

I can honestly say I've put in less than a dozen rolls of T+E since brown & blue came in, just not something I get involved with. But, on those rare occasions, I use a knife.

I wonder whether there is any kind of cable you can strip with a spoon?
 
Either or, doesn't make much of a difference as far i'm concerned, though it's very rare i come into contact with BS style T&E these day's. Not my favourite cable at the best of times, much prefer the continental round cable.
 
I'm just surprised no-one has yet waived the joker card of 'it stretches the cpc and changes the csa'.
 

Reply to honest answers.... in the UK Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock