Discuss Is there such a thing??? (Mini trunking) in the Electrical Tools and Products area at ElectriciansForums.net

littlespark

-
Esteemed
Arms
Supporter
Patron
Reaction score
16,964
is there such a thing as a pre made bend for MT1 or MT2 size mini trunking at 45 degrees?

I want to change around my living room but I’ll have to extend all the TV cables from one corner to another but there’s a tricky bay window to negotiate.

It’s either that or I have to do some practice cutting at 22.5 degrees.
 
bite the bullit. chase it in you know it makes sense.
 
It’s all my fault of course. When we had the extension built, the wife wanted a bay window.
I ran cables for behind the tv.... data, telephone and satellite comes through the wall from outside.
Now we want to have a change and put the tv in a different corner, hence trunking round the skirting boards, awkward angles.
No 230v power, just the data and sat cables.

I suppose the saving grace is the cut mitres won’t actualky be seen as there’s curtains hanging almost to the floor.
 

Reply to Is there such a thing??? (Mini trunking) in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review. If, like I did, you find yourself...
Replies
7
Views
2K
Hopefully someone wiser than me can help explain some odd measurements I’ve taken at my own home. This is a long read, I’ve tried to give as much...
Replies
21
Views
4K
Hi all, Was just looking for some best practices around using plastic mini trunking. How do you guys join trunking on corners of walls that are...
Replies
57
Views
27K
Squid
S
Hi folks. I cut one of the cables on my ring circuit, attached the 2 now separate ends to a new 30a junction box, and then run 2 additional spurs...
Replies
237
Views
36K
Customer has had builders in (nearly finished), taken down internal walls and made extended kitchen space. Various circuits loose, and dangling...
Replies
11
Views
2K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock