Kewtech kt63 no trip function

[Paddington]

hi whilst testing ELI on lighting circuits, using kewtech kt63 on loop no trip function, test keeps tripping rcd once polarity and voltage is confirmed. I know the kt63 tests at 250v in this mode, but it shouldn’t trip the rcd, anyone else experienced this? Is it calibration time? Is it me? Is it the rcd? Anyone’s thoughts, and I know the calculation is Zs =(Ze + r1r2), a bit frustrated the damn things keep tripping, upstairs and downstairs, separate circuits, separate rcds, both trip.

 

[Pete999]

hi whilst testing ELI on lighting circuits, using kewtech kt63 on loop no trip function, test keeps tripping rcd once polarity and voltage is confirmed. I know the kt63 tests at 250v in this mode, but it shouldn’t trip the rcd, anyone else experienced this? Is it calibration time? Is it me? Is it the rcd? Anyone’s thoughts, and I know the calculation is Zs =(Ze + r1r2), a bit frustrated the damn things keep tripping, upstairs and downstairs, separate circuits, separate rcds, both trip.

Watch the R1R2 thing r1,rn and r2 are endto end readings of a ring final circuit
Zs= Ze+(R1+R2) your formula is wrong

 

[buzzlightyear]

Is it calibration time? Is it me?

if you do not know how to use your tester ,may be you need to ring kewtech and ask them !

 

[Paddington]

if you do not know how to use your tester ,may be you need to ring kewtech and ask them !

Tester being used correctly, first time this has happened

 

[Wilko]

Hi - did you unplug everything and turn off lights from the final circuits supervised by the RCD ? (as there may be loads with leakage)

 

[Paddington]

Watch the R1R2 thing r1,rn and r2 are endto end readings of a ring final circuit
Zs= Ze+(R1+R2) your formula is wrong

Yeah that’s the formulae I used, I was to lazy to type plus signs and brackets in right places!

 

[buzzlightyear]

Home | Kewtech - http://www.kewtechcorp.com/

 

[The Ghost]

Phone Kewtech they are really good. Oops beaten to it by a mile!

 

[Paddington]

Hi - did you unplug everything and turn off lights from the final circuits supervised by the RCD ? (as there may be loads with leakage)

Yeah even down to disconnecting separate cooker hood circuit from mcb. Needed doing anyway to do fused switch change and test, so not a hassle but still same result, all light bulbs removed everything.

 

[Wilko]

Good job! I've the 65 and it's been 100% (touch wood). Does 63 have ramp test?

 

[buzzlightyear]

Phone Kewtech they are really good. Oops beaten to it by a mile!

another one ready to buy a Megger!

 

[Paddington]

another one ready to buy a Megger!

Haha that thought tripped faster than the rcd

 

[Paddington]

Good job! I've the 65 and it's been 100% (touch wood). Does 63 have ramp test?

My 63 has been a great buy, this one is strange. No doesn’t have ramp the 65 is a step up from the 63.

 

[Wilko]

If you're into the CU, perhaps dis the RCD outputs and test separately?

 

[buzzlightyear]

now how many people been on this forum having trouble with the kewtech testers.lots , flack jacket on !