Discuss LTC Addressable Interface Module to be connected to the ballasts in the Lighting Forum area at ElectriciansForums.net
What is unswitched live and switched live in the attached image?. It it the drawing of the addressable interface module (AIM) to be connected to the ballasts.
To where should I connect these USL & SL terminals? What is the purpose of these terminals?
Reply to LTC Addressable Interface Module to be connected to the ballasts in the Lighting Forum area at ElectriciansForums.net
Ferrets are known for being small, resourceful, and incredibly clever. They can solve many problems by fitting into tight spaces and doing jobs us...
Hi, while carrying out an EICR at a farm cottage on Friday i came up against a problem early on. Whilst measuring the Ze the reading i obtained...
Hi guys
Moved into a new place this year and have a g24 4 pin light fitting in the storage cupboard. Light recently went and I've tried two new...
On this commercial building we are refurbishing it has the above fire alarm panel which I think is pretty much brand new, I'm not even sure it was...
Now Ive done Periodic Inspection and Initial Virification Qualifications with LCL/EAL (so non C&G 2394/95) #
strange part building Modules , this...