Main cut out missing

[Michal]

Whats this?.How to code ,absence of main cut out fuse?

 

[westward10]

What is behind the panel.

 

[Michal]

Behind panel ,not much.Cable split for line and neutral without any fuse etc.

 

[westward10]

Is it a block of flats.

 

[Michal]

Yes block of flat
[automerge]1597124675[/automerge]
Block of flats

 

[Julie.]

Then the fuses are likely at the main intake to the property, where the supply is split to individual cables supplying each flat.

 

[Wilko]

Hi - as per Julie, that cable behind the panel will be connected to the fuses etc. If it’s an older block of flats, the cabinet might be in the foyer and handily have a fine selection of non electrical items stored in it.

 

[littlespark]

Code as N/V
Not verified

 

[telectrix]

I'd go with FI.

 

[Michal]

I'd go with FI.

Im going to put FI

 

[Strima]

Not verified, no access to incoming DNO supply.

 

[davesparks]

Single insulated conductors exposed to touch, C2

 

[Julie.]

Single insulated conductors exposed to touch, C2

If we are looking beyond the OP's question (which I would fi as it's pretty important), then there is a plethora of issues in that one picture alone, at least three C2s without looking closely!

I assume the rest of the installation has further issues

 

[littlespark]

FI if you want to visually check the condition.
NV if the fuse size isn’t marked on the housing somewhere.