what’s your guy’s opinions on metal panel locks on fibreglass/plastic enclosures. The reason for asking is I’ve seen a few of these enclosures fitted with metal locks and I know the likely hood of the lock being made live it extremely low but would you still class the locks as exposed conductive parts?
Discuss Metal panel locks on plastic enclosures in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Think they have been retrofitted
Reply to Metal panel locks on plastic enclosures in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi all,
Just to be clear, I'm not looking for advice on upgrading but rather just clarification of our existing setup.
We need to upgrade the...
This was prompted by me seeing a couple of videos of cone/step drill being used to make holes in a CU. I use a step bit quite often, especially in...
- Locked
- Sticky
Beware a little long.
I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Good morning everyone. I’m looking at getting an EV charger installed at my home and the company is requesting that I earth bond my water supply...
Grateful for a kick in the right direction on the following: a telecomms engineer stated out that an outdoor metal cabinet (earthed & bonded) was...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
For Sale Wera KK Vde Interchange Screwdriver Set Slim *New*- Latest: AngelLaHash
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.