Metrel mi3000

[Gary latto]

Hi all still learning and getting my head around testing,
I've got a metrel mft and don't seem to be able to work out if possible to do a ramp test with this particular one. Anyone else got same mft and can confirm if it's a function on this model ??
Thank in advance

 

[telectrix]

look here.appparently it does. look under specification.

Multifunction Testers and Part P Test Equipment

We have a huge range of Multifunction Testers and Multifunction Part P Test Equipment from Megger, Kewtech, Metrel & Martindale. Test electrical installations to UK wiring regs: BS7671

www.test-meter.co.uk

RCD Ramp Test - indicates actual trip current

 

[Andy78]

Yes mate. I have two of them. They have ramp test on.

Set the left dial to RCD then use the directional buttons round the test button to cycle through the settings.
Try this on each dial setting to get fully used to what the kit can offer.

 

[HappyHippyDad]

Yes it does,
I haven't used mine for ages but I think you just set the dial to RCD then set the sub function as tripping current i.e _ _ _ _ mA

 

[Gary latto]

look here.appparently it does. look under specification.

Multifunction Testers and Part P Test Equipment

We have a huge range of Multifunction Testers and Multifunction Part P Test Equipment from Megger, Kewtech, Metrel & Martindale. Test electrical installations to UK wiring regs: BS7671

www.test-meter.co.uk

RCD Ramp Test - indicates actual trip current

Cheers tel Moines the older model so I'm still unsure ?
[automerge]1583438576[/automerge]

Cheers tel Moines the older model so I'm still unsure ?

Mines not moines?
[automerge]1583439136[/automerge]

Yes mate. I have two of them. They have ramp test on.

Set the left dial to RCD then use the directional buttons round the test button to cycle through the settings.
Try this on each dial setting to get fully used to what the kit can offer.

Think I've got older model Andy mines got dial on right side ?

 

[Andy78]

Think I've got older model Andy mines got dial on right side ?

That's alright, I apparently can't tell my left from right. Use the dial on the right and give it a go.
?

 

[Gary latto]

That's alright, I apparently can't tell my left from right. Use the dial on the right and give it a go.
?

Lol so same operation then ? Is it this setting ? Sorry to be a pain but still learning and getting used to it ?

 

[Andy78]

Lol so same operation then ? Is it this setting ? Sorry to be a pain but still learning and getting used to it ?

Yeah, use directional buttons on RCD setting to scroll through the settings as per HHD's picture from the quick start guide.

 

[Gary latto]

Thanks for replying guys appreciated ?

 

[davesparks]

Hi all still learning and getting my head around testing,
I've got a metrel mft and don't seem to be able to work out if possible to do a ramp test with this particular one. Anyone else got same mft and can confirm if it's a function on this model ??
Thank in advance

Have you tried reading the manual?

 

[Gary latto]

Yes davesparks but the old grey cells aren't what they were, my whole life I'm better if shown something rather than trying to get the theory stuff to sink in etc ?