Mira Shower - Has Power - No Lights

[DPG]

Sorry Wilko, I can’t seem to upload any pictures. It’s giving me an error.

Telectrix - It’s a wall mounted cooker switch, possibly (?) not ideal for a bathroom but it’s at the back of a deep recessed cupboard.

I’ll change it round this evening after work, making sure I have fresh copper in each of the terminals

It would be preferable to get a sparky in to do it. But if you do decide to do it yourself then be very sure to make good connections. When you have connected the wires, push the switch back into place temporarily to ensure it will go, then check the connections again for tightness before you fasten it back to the back box.

 

[The Ghost]

At some point there should have been the shower MCB popping off if you see burn marks around Live/Earth if it didn't I would think that is a bit worrying.

 

[TypicalMan1234]

No joy.

I changed over the isolator switch for a new one. Made sure everything was seated properly and tightened. Checked if there was power coming into and going out of the switch. Checked there was power in the shower itself. All looks ok, to the untrained eye.

The shower is still not doing anything.

Time to call in the Cav (aka Mira Engineer).

 

[buzzlightyear]

pcb board possible gone.

 

[TypicalMan1234]

Just to update for future readers, the Mira engineer came and it was a faulty relay board. A five min switch out and it's all working again.

 

[DPG]

Nice one. Thanks for letting us know.