Need meter advice for returning spark

[baycity]

Hello, I am new here and returning hopefully to the electrical trade after 10 years. I was wondering which meter is best Fluke,Megger ?? Price is a definite consideration. Thank you and hello everyone.

 

[willy fixit]

I like my DiLog 9083p - Nobody else will though, probably. Served me well for 7 years house bashing!
£383.94 from TLC knock some more off if you have an account - bargain!

 

[baycity]

Thank you for your quick reply. I will get a price and investigate as on a budget .M

 

[Octopus]

My metrel is still going strong after 8 years of hard labor ...

 

[PEG]

AVO 8 is what you need.

(You did want an analogue multimeter?)

 

[baycity]

Thanks for the AVO 8 rec, I do remember them but my eyesight not quite up to this anymore. What about the Fluke 17 +

 

[buzzlightyear]

Megger , for me tried a tested ,on second one.

 

[Ian1981]

Personally I would acquire a meter which will carry out high current zs testing using only 2 leads as trying to balance 3 is sometimes a pain.
My mft 1552 megger failed calibration so I’m using a kewtech kt64 and the difference is very noticeable!!

 

[Ian1981]

Personally I would acquire a meter which will carry out high current zs testing using only 2 leads as trying to balance 3 is sometimes a pain.
My mft 1552 megger failed calibration so I’m using a kewtech kt64 and the difference is very noticeable!!

 

[The Ghost]

Kewtech KT63 very good if price is a consideration. It has a piggy back lead to do two wire high and low Zs. Also has magnets on the back to stick it on surfaces which can be handy. Nice display.