Discuss old style wireable CU in the UK Electrical Forum area at ElectriciansForums.net

OP: Please can we have some pics of the boards and cables, then perhaps we can guide you as to the age, likely faults, things not to disturb etc. while working out a plan of action. FWIW the oldest cable I have in service in an installation is over 100 years old and fine, while some from the 1960s is no good. Glenn is on the money with it depending on the installation's history and a bit of it is just luck as to how long stuff lasts.
 
yep...its all about the environment its in....the times (and the magnetude) of fault/s it has been subjected to....

the levels of loading under normal conditions

installation method...
the list goes on....
 
oh would it now?

i think not....

see as it would have been as a result of your investigations that the insulation `fell apart`...then you would have a duty of care to make a repair....even if only temporary....

as you also have a duty of care to leave the occupants with adequate power for lighting and outlets....

That was what I was getting out you could end up opening a can of worms just by taking off 1 socket :oops: so message to OP is be care full when doing your inspections
 
hi all sorry i gave up checking forum replies as i was getting loads of messages about playing chess etc lol, yes i will sort out some pics of the installation when i go back next

all the best and thanks for all the advice
 

Reply to old style wireable CU in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Some advise or views would be appreciated. My supply is 100 amp single phase. I purchased my property 3 years ago or so, the owner prior to the...
Replies
29
Views
843
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit. This is not used...
Replies
17
Views
819
Hi guys, I have supplied my Shed with a 6mm SWA cable into a nice consumer unit. In there I have a 6Amp MCB for the lights and a 16 A supplying a...
Replies
25
Views
973
I had an interesting little job this morning. Three sockets in an extension were not working and haven't worked for quite some time (years). It...
Replies
0
Views
273
Evening everyone . Currently looking at pricing a job up . It’s a hot tub supply . Outside socket with a few spare ways in an outdoor cu . 10mm...
Replies
7
Views
578

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock