Discuss old style wireable CU in the UK Electrical Forum area at ElectriciansForums.net

As mention earlier the installation will probably be OK until you start taking it apart to have a look, I can see it now just taking a socket off to have a look and the rubber falling off leaving bare copper cable!!! then the option will be to turn off the supply to make it safe
 
As mention earlier the installation will probably be OK until you start taking it apart to have a look, I can see it now just taking a socket off to have a look and the rubber falling off leaving bare copper cable!!! then the option will be to turn off the supply to make it safe

Or sleeve it, only joking it's normally the lighting circuits with these old cables that take a hammering.
 
As mention earlier the installation will probably be OK until you start taking it apart to have a look, I can see it now just taking a socket off to have a look and the rubber falling off leaving bare copper cable!!! then the option will be to turn off the supply to make it safe
oh would it now?

i think not....

see as it would have been as a result of your investigations that the insulation `fell apart`...then you would have a duty of care to make a repair....even if only temporary....

as you also have a duty of care to leave the occupants with adequate power for lighting and outlets....
 

Reply to old style wireable CU in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Some advise or views would be appreciated. My supply is 100 amp single phase. I purchased my property 3 years ago or so, the owner prior to the...
Replies
29
Views
975
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit. This is not used...
Replies
17
Views
867
Hi everyone, On a job at the moment and trying to Work out cable size needed for property supply. Lots going on and struggle to work out...
Replies
10
Views
523
Hi guys, I have supplied my Shed with a 6mm SWA cable into a nice consumer unit. In there I have a 6Amp MCB for the lights and a 16 A supplying a...
Replies
25
Views
1K
Hello. I live in a new build house with a separate garage. The garage is connected to RCD in the house to a 16A circuit breaker. The cable from...
Replies
1
Views
231

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock