Discuss ouside light wiring! in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

U

Unregistered

Hi,

I have recently moved house and when i went to put up my new outside lights i came accross the following, a brown wire, a black wire, a grey wire and a bear wire with no insullation on. I cant find this set up in any of my referance books.

Can any one tell me what's what please?

Thanks Dan
 
It's 3 core & earth Dan
if it's on an outside light I suspect the light would be a pir type.
So you will probably have a perm live / a switched live / a neutral & the bare wire will be the cpc.
 
Hi,

I have recently moved house and when i went to put up my new outside lights i came accross the following, a brown wire, a black wire, a grey wire and a bear wire with no insullation on. I cant find this set up in any of my referance books.

Can any one tell me what's what please?

Thanks Dan

these are the new harmonised colours:eek:
 
Thanks guys,

I'm going to get a pro in i think to the job.

for my own mind have i got this right-

Brown is live, black is earth, grey is switch live, and the bare wire is circuit protective conductor?

Where does the CPC go?

Thanks again
 
Without testing each conductor we wouldn't know whats what but,
Brown = phase (peranent live)
Black = switched live (sleeved brown)
Grey = Neutral (sleeved blue)
Bare copper = CPC (earth)
 
Brown = phase (peranent live)
Black = switched live (sleeved brown)
Grey = Neutral (sleeved blue)
Bear = Yogi (or was it boo-boo?)
 

Reply to ouside light wiring! in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

I bought this house a couple months ago. It was built in 1952 (same as me) but has been rewired with yellow 12 awg Romex dated 2007. Looks like a...
Replies
7
Views
507
I hope someone can help with this as I'm stumped. My landing hallway ceiling (2016-build house) has two rose pendants which I've attempted to...
Replies
7
Views
410
I'm trying to wire in a 4 core capacitive sensor into a safety circuit. I have brown, blue, white and black coloured cores and it's a NO sensor...
Replies
1
Views
207
Hello everyone, hope all are well. I'm changing a ceiling rose and have lost the diagram showing where everything was connected (to the old light)...
Replies
8
Views
902
I have pulled out an old evaporative system I purchased many years ago from storage to have a look at it and see if I can get it running. Was...
Replies
1
Views
191

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock