Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members

Discuss Power supply for doors in the Electrical Engineering Chat area at ElectriciansForums.net

M

Mrkk00

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

30 magnets (doors NC) is connected to an I/O device in a cabinet. Will a 10A power supply to the cabinet be enough, when each is drawing 95mA. Or should one get a bigger power supply to be safe?
 
uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members
Aico 3000
Spoon

Spoon

-
Mentor
Esteemed
Arms
Welcome to the forum mate.
I'm presuming each door will be wired back to an output in the I/O module. What does the manual say for the power to the I/O module?
What else is going in the cabinet.
 
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members

Reply to Power supply for doors in the Electrical Engineering Chat area at ElectriciansForums.net

SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
Thread starter Similar threads Forum Replies Date
E Electrical Engineering Chat 7
Dan Carroll Electrical Engineering Chat 33
Top Bottom