Problem with PSSC on three phase supply

[Geordie Spark]

its a hobby, people like what they like.

I agree.

I like Industrial Archaeology (think Fred Dibnah) and all that sort of stuff, Rockabilly, Rock n Roll, Southern Boogie, Fleetwood Mac, Dire Straits, photography, Toyota MR2s, Duck Dysentery on TV and a very funny Pikey woman.

 

[pepparz]

i also collect spades and have a decent colletion, my best been a 1930's cast steel digging spade double braced on ash shaft with a box "D" handle.

- - - Updated - - -

love watching old fred dibnah episodes on sky.

 

[Geordie Spark]

i also collect spades and have a decent colletion, my best been a 1930's cast steel digging spade double braced on ash shaft with a box "D" handle.

- - - Updated - - -

love watching old fred dibnah episodes on sky.

Yes .... he was a grand bloke.

I must say I admire blokes who can call a spade a spade.

Tidyboiler tells me her Dad ( a tough little Pikey bloke) always called a spade a spade and often to his face.

I have a collection of woodworking tools that were made and used by my Grandfather in a very impressive tool chest that he made himself.

I think to a collector they will be worth some money.

 

[pepparz]

it was fred dibnah who got me into traction engine rallies (not personally mind) cant wait for pickering's rally in august.

 

[Geordie Spark]

it was fred dibnah who got me into traction engine rallies (not personally mind) cant wait for pickering's rally in august.

I used to get around a lot but haven't been able to for the past couple of years cos I've not been well.

I always wanted a good camera outfit and after about 30 years finally got it - all packed in a big fluck off rucksack that I can't carry .......

 

[pepparz]

well i do hope your health starts to improve:20:

 

[Geordie Spark]

well i do hope your health starts to improve:20:

Thank you.

I appreciate that, the past months since October have not been much fun, but could be worse. I think I'm picking up a bit now since Friday when Tidyboiler almost literally dragged the GP by his balls from his full surgery direct to my bedside!

I had his full attention from then on.

 

[pepparz]

well done tidyboiler!

 

[telectrix]

Only close to the Factories distribution Transformer(s)...

or on an eng54 installed rod. lol. :75:

 

[guest119]

We have a big grey thing at the top of our street surrounded by a green steel fence.

.

Thats your local shop Geordie :ciappa:

Boydy

 

[telectrix]

I used to get around a lot but haven't been able to for the past couple of years cos I've not been well.

I always wanted a good camera outfit and after about 30 years finally got it - all packed in a big fluck off rucksack that I can't carry .......

go on then. keeping us in suspenders, what camera?

 

[Geordie Spark]

go on then. keeping us in suspenders, what camera?

Canon 30D

Old(ish) but does the job - a bit like you Tel.

Bag full of assorted lenses -Canon & Sigma, Sigma flashgun, Manfroto tripod and a monopod (one legged tripod) bits & bobs and I can't lift the bloody thing.

 

[tidyboiler]

Canon 30D

Old(ish) but does the job - a bit like you Tel.

Bag full of assorted lenses -Canon & Sigma, Sigma flashgun, Manfroto tripod and a monopod (one legged tripod) bits & bobs and I can't lift the bloody thing.

A bit like my make-up bag.

 

[trev]

Meanwhile back at the OP.
Might sound silly but how are you off for charge in the battery pack? Many testers start to give really daft readings if they're low.
I also think you may need to check your reading as it does not work out to 23Ka

 

[Geordie Spark]

A bit like my make-up bag.

I don't understand why you drag all that clarty stuff around with ye - ye divvent need it - yer bonny enough withoot it!!

 

[trev]

Furthermore, a Ze of 0.1 ohms at the distance you quote from the transformer is unlikely in my experience. I once did a rewire less than 50 metres from one and the reading I got was 0.47, considering how streets are wired this isn't beyond the realms of possibility but I checked it with different testers both very recently calibrated and they agreed.
I'd definitely be checking those batteries mate.

 

[Engineer54]

or on an eng54 installed rod. lol. :75:

As good as any of my earth rods may be, i somehow doubt they would have any influence on L-L or L-N fault currents!! lol!!

 

[telectrix]

Canon 30D

Old(ish) but does the job - a bit like you Tel.

Bag full of assorted lenses -Canon & Sigma, Sigma flashgun, Manfroto tripod and a monopod (one legged tripod) bits & bobs and I can't lift the bloody thing.

nice. i have the 10D. even older.does everything i need, though. only gripe i have is the size of the LCD screen 1.8".