L
Lokesh
Hi,
I have installed VLT FC51 to control the speed of motor based on values it receives from Differential Pressure Transmitter (DPT). However, I have never set-up a frequency converter before, so someone could please help me in programming it.
I have connected the DPT output to port 60 of LVT and can see FC51 is receiving values between 4-20mA as desired.
What I would like to do is:
1. at Reference value of 4mA I would like to run motor at 100% speed or 50hz
2. at Reference value of 10mA I would like to run motor at 40Hz and
3. at Reference value of 16mA I would like to run motor at 30Hz
I am using MCT-10 software to program the VLT. Could someone please guide me how to achieve above mentioned desired result.
Thanks.
I have installed VLT FC51 to control the speed of motor based on values it receives from Differential Pressure Transmitter (DPT). However, I have never set-up a frequency converter before, so someone could please help me in programming it.
I have connected the DPT output to port 60 of LVT and can see FC51 is receiving values between 4-20mA as desired.
What I would like to do is:
1. at Reference value of 4mA I would like to run motor at 100% speed or 50hz
2. at Reference value of 10mA I would like to run motor at 40Hz and
3. at Reference value of 16mA I would like to run motor at 30Hz
I am using MCT-10 software to program the VLT. Could someone please guide me how to achieve above mentioned desired result.
Thanks.