Discuss Socket heights in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

F

Fatbloke

Just about to do my first re-wire. I know that on new builds socket and switch heights have to be to the new heights to meet 17th requirements but I am going to re-wire a 1960's place and would like to know if the socket heights can remain as is, or have to be re-cut to the new heights? The customer is keen for the sockets to remain in their original position as it would save them money.
 
the idea of the new heights is to make them more consumer accessable,ie for diabled people.i am currently doing 17th edition and the tutor is pointing out that consideration should be given to location and height of consumers units with increased tripping of rcd's
 
Rewire heights can remain the same as is/was not sure what page but it is in the green electricians guide to the building regs
 
Hi


you can keep the sockets and switches to the same locations, but advisable to use the new heights. But consideration on your distribution board height is required..


you may want to consider the people that live at the property are they old or have restricted reach? If so I would consider the new heights..


Regards
 

Reply to Socket heights in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock