S
soham
I wanted to know how accelerated aging test is done, if any one here is familiar. Also if any one would give composition of fire-resistant coating compound applied on the cables.
Discuss Testing of fire barriers & breaks for cables in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Reply to Testing of fire barriers & breaks for cables in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
I'm practising EICRs on friendly locations as I'm still in training - technically done my 2391-52 but frankly need loads more practise.
I've just...
I am replacing some of the old receptacles in a 1940s house. Armored BX cable, two conductors, cable is the ground. Mostly pretty straightforward...
I'm about to order this wired smoke alarm system as it can network but I just went to see how my existing fire alarms are hooked up and there...
Hi All
Happy new year to all!
First post but long timer lurker, so thanks for all the previous help!
Just wanted to clarify something I have...
Hi! DIYer here. I have an MCB running to a cooker isolator switch. The RCD connected to this set of MCBs is tripping and isolating the cooker MCB...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.