Hi, I am trying to wire a two speed switch to a three phase motor. I have continuity checked the switch in both positions 1 - Low and 2 -High (See attached) Can someone confirm if this is correct and would this change the speed. Secondly i have a cable coming from what is I assume from the delta overload contactor and a a cable coming from the back of the wheel head motor switch (see attached). Where on the switch do these two wires get connected.
- Thread starter zac211277
- Start date
Discuss Three phase motor (two speed switch) in the UK Electrical Forum area at ElectriciansForums.net
Reply to Three phase motor (two speed switch) in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Good day to you. I need electrical drawings urgently and hopefully there is someone that can assist me. They are all for electrical trade test...
BIG place OK lots of electrical bits.
but one on a 3 phase Radial is tripping its RCCB
so i check the wiring making sure its tight and it has...
I have a scenario where there is a three phase DB in a commercial property where there are mixture of three phase and single phase washing...
FYI --- This is a U.S. installation. I'm replacing a three way switch (the UK might more sensibly call it a two way switch??) with a Kasa Smart...
First, sorry if I'm not in the correxct thread.
I'm trying to replace an old switch with a WIFI switch and cannot seem to do it right. There are...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.