Wireless UFH thermostat

[Pretty Mouth]

All of the UFH thermostats that I have ever fitted have had the air temperature sensor integrated into the hard-wired wall mounted programmer, with the floor temp sensor cable also connected directly to it.

I have a small UFH job where the UFH will be the primary heat source, so an air sensor is necessary, but the room layout makes it difficult to have the air sensor and programmer located in the same place as the floor sensor.

It would be convenient if the programmer and air sensor were together in a battery powered unit that could be placed anywhere in the room, while a hard wired 'receiver' with connected floor sensor were fitted elsewhere, the 2 units communicating wirelessly.

Does such a product exist? Or is there another way to achieve the above?

 

[Rockingit]

Nest is your friend for this. Have done this many times - receivers based at the UHF manifold and the sensor remotely in the zone.

 

[Pretty Mouth]

Nest is your friend for this. Have done this many times - receivers based at the UHF manifold and the sensor remotely in the zone.

Thanks @Rockingit . Just to clarify, I'm talking about electric UFH, and it sounds like you're referring to a wet system? Can Nest be used with an electric UFH system?

 

[kropaske]

I take its the electric UFH?
Check the Heatmiser website, they have various options of remote monitoring air temperature

Electric Underfloor Heating Thermostats from Heatmiser

Here you will find a variety of electric underfloor heating thermostats with varying features to meet your specific application and requirement.

heatmisershop.co.uk

 

[Rockingit]

Thanks @Rockingit . Just to clarify, I'm talking about electric UFH, and it sounds like you're referring to a wet system? Can Nest be used with an electric UFH system?

Certainly can. When you set up the system it asks you for the type of energy source - and at the end of the day it‘s just a switch the same as any other sensor.