I have been working on a chandelier design for a month now in 3d builder and will be printing it, now the wiring part comes into play because this particular chandelier requires 36 lights in the design. It will be 5 tiered and 3 of the middle tiers will be lights the top and bottom tiers will have 9 lights and the middle 18 lights in two rows of 9 (hope this isn't confusing). Any way I will be mounting it under a glass dome that will sit on a table as a lamp that can plug into a wall outlet. I also will be wiring this to a switch. Now I'm trying to figure out how to wire this all together if at all possible. I feel like this is a rather tall order. If you have any alternative suggestions I would welcome them.
- TL;DR
- Trying to wire 36 LED lights together that will be wire to a switch and be plugged into a wall.