Discuss Zanussi cooker tripping electric in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
0
Hi i was wondering if anyone could give me advice please? I have a zanussi cooker and when i turn the grill off after use it trips the electric. Any idea what could cause this? Thanks
 
I have the same thing when I turn my new oven off , its not a Zanussi thou.
Mine works perfectly but when I turn the dial to the off position , bang goes the rcd. Happens every time.

The plus side my rcd gets a test several times a week :)
 
Hi i was wondering if anyone could give me advice please? I have a zanussi cooker and when i turn the grill off after use it trips the electric. Any idea what could cause this? Thanks
Might be damp or a faulty switch needs an IR test by an Electrician
 
I have the same thing when I turn my new oven off , its not a Zanussi thou.
Mine works perfectly but when I turn the dial to the off position , bang goes the rcd. Happens every time.

The plus side my rcd gets a test several times a week :)

I'd me a bit peed off with that as I have an 16th Ed board with just the one RCD for the whole house.
 
I'd me a bit peed off with that as I have an 16th Ed board with just the one RCD for the whole house.

I have a 16th split board , so I don't lose the lighting or anything on the non rcd side

I only have the cooker and ring on the 30ma rcd side
 

Reply to Zanussi cooker tripping electric in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I'm not an electrician. I clean cookers and today arrived to a rangemaster range cooker. Got started, and as part of my routine, I turn on ovens...
Replies
1
Views
715
Hi All, We have an old Country villa in Spain. The housing electrics were not good so the house recently has been completely re-wired to a good...
Replies
2
Views
664
Hi, I bought my Zanussi ZCV663MWC cooker ten years ago, I replaced the top element four months ago and its been fine until now. When I turn the...
Replies
1
Views
1K
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
1K
A friend's partner has an interesting fault, if it is a fault. She sets the shut down timer on the cooker and when the timer goes off (which in...
Replies
9
Views
761

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock