Search the forum,

Discuss New distribution board problem in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

f.awn

-
Reaction score
0
Hi.
I am looking into having a replacement distribution board / consumer unit fitted into my home.
My problem is that I live in an area where thousands of swans overwinter and breaks in power supply can on occasion happen frequently in any 24hour period .
With my current wire fuse system this is not a problem but if and when I upgrade it will create a major problem if the circuit needs to be reset each time it is tripped.
My current contractor is trying to find a solution to this but I thought I woul£ see if anybody had any solutions whereby the circuits (especialy the freezers etc) would not need resetting each time.
I’m not intending to do the work myself, just looking for guidance.
 
575b8q3i3
Not the brightest of birds they will have a go at anything. o_O
1407937192668_wps_9_PIC_BY_GEOFF_ROBINSON_PHO.jpg
 
them Swans are a Pikey offshoot of Hells Angels. the ride their choppers up to sub stations and nick all the copper they can find, thus causing your outages. 2 of them have sidecars fitted to carry the stolen copper.
 
The swans fly into overhead cables/infrastructure and blow themselves to pieces I know someone who worked for the grid.

He said the mess was something to be seen, they had to kill the power while they cleaned it all up.

Cheers

-Quote
" ANIMAL welfare groups are demanding an enquiry after the deaths of over 170 swans at Monkton. It is believed they collided with overhead power lines and were unable to fly. Five more birds were seriously injured.

Two train passengers travelling separately spotted a large pile of carcasses on Monkton Marshes and phoned a swan rescue centre in Surrey on their mobile phones.

A team from the Swan Sanctuary, Egham made the gruesome discovery on Sunday. Founder Dorothy Beeston said: “There were 173 dead birds altogether, most with broken wings and necks.

“They appeared to have crashed into the overhead lines, and hit the ground. “Many had crawled into ditches and starved, as they were unable to feed themselves.

“Some seemed to have been there for months, but these are the first reports we’ve had. It was absolutely diabolical.”

Ms Beeston said she was pleased that five birds had survived, but all were very ill. One, a seven-month-old cygnet, hit a power line as sanctuary workers were at the site, and is awaiting surgery for a broken wing.

The sanctuary has the only operating theatre in the country specifically designed to treat swans. Ms Beeston said she had been lobbying utility companies for years to get them to put markers on their power lines to avoid birds hitting them.

She said: “In winter especially, swans don’t see the lines until they are almost on top of them. By then it is too late and entire flocks collide with each other.

“If plastic markers were put on the lines, they would be able to see them in plenty of time.”

Her calls have been echoed by Suzy Gale, wife of Thanet North MP Roger, who chairs the Conservative Animal Welfare group. She has written to Seeboard to ask them for markers on lines.

The five injured swans will remain at the Swan Sanctuary until they are fully fit. They will then be rehomed in private lakes, with other disabled swans.

Anyone interested in finding out more about the Swan Sanctuary can visit their website www.swanuk.org.uk, or write to them at Field View, Pooley Green, Egham, Surrey, TW20 8AT
 
Last edited:

Reply to New distribution board problem in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

For context i am in my 2nd year in college and my head is going round in circles a question in my project for which i need to select the right...
Replies
22
Views
4K
Been asked to move, remove and add some sockets the kitchen and I’ll need to add a circuit for an electric hob. Looked at the board and it’s one...
Replies
17
Views
833
Hello all, I wonder if I can get some opinion on my deliberations on an old TPN installation with numerous 1P sub-boards wired up with 16mm T&E...
Replies
5
Views
1K
Hello Need to replace a distribution board in the next few weeks to allow for more circuits to be installed in January. Existing is a TT system...
Replies
6
Views
1K
I'm doing a college design project and need to choose a suitable range of circuit protective devices for the whole contact. I've chosen and...
Replies
7
Views
4K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock