Dodgy trade pictures for your amusement! - 1 Million Views!

Post new thread

Currently reading:
Dodgy trade pictures for your amusement! - 1 Million Views!

Discuss Dodgy trade pictures for your amusement! - 1 Million Views! in the UK Electrical Forum area at ElectriciansForums.net

Darkwood

Darkwood

Staff member
Mod
Esteemed
Arms
Supporter
Reaction score
10,221
Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.

Beware plumbers!!!.jpg

I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. :eek:mg_smile:

Beware plumbers!!!.jpg
 
Sort by date Sort by votes
5 amp lighting fuse had four wires.
1 - every light in house (IR of zero)
2 - not identified (IR of >299M)
3 - smokes (IR of >299M)
4 - outside light.

Every pendant had a hidden junction box above it so I was looking for an easy place to break the circuit.
First floor board I pull up:

1677329005279.png

Oh great.. every fitting probably like this, and separating them didn't improve IR.
Obviously I wasn't going to leave it like that, so I did my own dodgy contribution as I'd run out of cable ties. I felt it was in keeping with the rest of the house.
1677329216952.png
 
Upvote 0 Downvote
Taking down a temporary power feed this morning. had been working perfectly well, last used Thursday I think. Decided to see how dry the Wago box was, lost quite a bit of water before getting this far:
water-in-wagobox.jpg

Yup, the lower half (as it sat dangling from the 3 core) was ice and the rest water. I am surprised it didn't trip the RCD, maybe the water was relatively pure?
 
Upvote 0 Downvote
pc1966 said:
Taking down a temporary power feed this morning. had been working perfectly well, last used Thursday I think. Decided to see how dry the Wago box was, lost quite a bit of water before getting this far:
View attachment 106453
Yup, the lower half (as it sat dangling from the 3 core) was ice and the rest water. I am surprised it didn't trip the RCD, maybe the water was relatively pure?
Click to expand...

Presumably wicked down along the earth wire.
 
Upvote 0 Downvote
pc1966 said:
Taking down a temporary power feed this morning. had been working perfectly well, last used Thursday I think. Decided to see how dry the Wago box was, lost quite a bit of water before getting this far.
Click to expand...
Can't remember if I posted this, but you wouldn't have had the issue had you followed this exemplarily method of working:
1677525788854.png
 
Upvote 0 Downvote
pc1966 said:
Taking down a temporary power feed this morning. had been working perfectly well, last used Thursday I think. Decided to see how dry the Wago box was, lost quite a bit of water before getting this far:
View attachment 106453
Yup, the lower half (as it sat dangling from the 3 core) was ice and the rest water. I am surprised it didn't trip the RCD, maybe the water was relatively pure?
Click to expand...
I dont think the membrane seal is intended to seal when you poke a hole in it like that.
a suitable compression gland would have probably done much better.
p.s. the glands need to be done up correctly with a spanner, hand tight will not provide a good seal.
 
Upvote 0 Downvote
pc1966 said:
Taking down a temporary power feed this morning. had been working perfectly well, last used Thursday I think. Decided to see how dry the Wago box was, lost quite a bit of water before getting this far:
View attachment 106453
Yup, the lower half (as it sat dangling from the 3 core) was ice and the rest water. I am surprised it didn't trip the RCD, maybe the water was relatively pure?
Click to expand...
In fairness I thought that ice was what was left of the gel😂😂😂
It looks like a Wiska Box rather than a Wago Box though, and I've never seen water in (or ice) in one of those before, but never seen one done quite like that either.
 
Upvote 0 Downvote
As above, if it was buzzzzzzzing, i would Wasp the F out of there.

some interesting collection of wire types and not quite perfect terminations.
 
Upvote 0 Downvote
Had a regular customer in a semi detached house, with a simple pyramid shaped roof covering both properties.
About 15 minutes after turning the loft light on, there would be two or three hornets buzzing around it, just two or three, never any more. Looked into every corner many times, and never saw any signs of a nest, or any other clue as to where they were coming from.
Was like this, every time, over a period of about 20 years.
 
Upvote 0 Downvote
littlespark said:
F**king hate wasps..... nasty little beasties.
Click to expand...
Not too keen on them myself.
They set up camp inside the solid stone wall of my living room a few years ago, getting in and out through failed pointing in multiple places. A complete can of expanding foam into the wall dealt with them.
They weren't too happy about that and went on the attack, but they don't fly too well with a lump of rapidly expanding and hardening foam on their backs.
 
Upvote 0 Downvote
littlespark said:
i think i maybe did!

F**king hate wasps..... nasty little beasties.
I keep a spray can of wasp killer in my van for such eventualities
Click to expand...

Washing up liquid kills them on contact. Spray bottle with a fairly strong solution of it will sort them in no time, without lasting impact on your lungs or expanding foam stuck to everything.

I didn't believe this would work until they decided to begin nesting in our bin - huge swarm neutralised in a couple of minutes.
 
Upvote 0 Downvote
Had to deal with these bees, at least it was outside, but had to open the window to unlatch the shutters, I found that the Hornets tend to leave you alone if you don't wave your arms around, they where quite happy buzzing around me whilst I was re-pointing the chimney.

UNADJUSTEDNONRAW_THUMB_43B.jpeg
 
Upvote 0 Downvote
nicebutdim said:
Washing up liquid kills them on contact. Spray bottle with a fairly strong solution of it will sort them in no time, without lasting impact on your lungs or expanding foam stuck to everything.

I didn't believe this would work until they decided to begin nesting in our bin - huge swarm neutralised in a couple of minutes.
Click to expand...
Scairy Liquid......to the wasps, then?
 
Upvote 0 Downvote
New posts

Reply to Dodgy trade pictures for your amusement! - 1 Million Views! in the UK Electrical Forum area at ElectriciansForums.net

Tiling Forum

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

UK Tiling Forum
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
    • Tiling Advice
    Back
    Top
    AdBlock Detected

    We get it, advertisements are annoying!

    Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

    I've Disabled AdBlock