Hi, I'm hoping I can trouble you guys for some help... I've got a Senco 18v Lion battery charger from the states.
I'm having trouble finding out how to use in the UK.
Details on the underside are
INPUT 120vac 60hz 85 W
But no mention of the output wattage.
Is there a way to make this...
I have just installed my first EV Charger yesterday. I have installed using a 6mm twin from the non RCD side of the consumer unit on a 32a type b MCB. The length of run is around 5 metres and is contained in 20mm round conduit.
The charger I have fitted is a Rolec with a built in type A 30mA...
Hi guys the thin wiring cable on my Black and Decker lithium battery charger for my power drill and saw was accidentally cut and I tried to rewire it back together (see photos). When I plug it into the wall outlet, the red light doesn't turn on which means it's not charging. What am I doing...
mariobrothers8
Thread
battery
battery charger
black
cable
charger
energy
lithium
not working
storage
systems
working
I’m looking to sell my Milwaukee Kit. It contains:
1x 18v SDS
1x 18v Combi Drill
2x 5.0ah Batteries
1x Charger
1x Carry Case
Collection is from Liverpool. I’m looking at £280 Ono.
1 x 18 Volt M18 BPD Compact Percussion Drill is a compact, high performance percussion drill that measures only...
Hi There!
Background info:
Domestic/agricultural premises.
TT 3 phase supply and main distribution board located inside stables (agricultural location).
Several solar systems, storage battery system + EV charger connected - (lots of DC current's being introduced)
Single phase submain from...
Afternoon,
I have heard off my supplier, the training course I did my 2919 and a few trusted mate that Rolec now do a charger with a PEN fault detector built in. Although my supplier is now struggling with the part number.
Anyone fitted on yet? Is this like the Unicorn device of old ?. Not...
Dear all,
We want to install an electric car charger, but our existing fuse board is at the back of the house and running a cable through the house will make a big mess. The electricity enters the house from the front, where we want to put the charger and that's where the meter is too. Can we...
iain.mcmenamin
Thread
board
car
car chargercharger
electric
fuse
fuse board
second
Plan to offer installation of EV Chargers, but not interested in using Earth Rods. I can only find two products, Zappi and Podpoint. Are there any others? Who would other EV installers recommend?
Electron
Thread
best
charger
earth
earth rod
electrical tools
ev charger
ground
without
So my understanding is I need to be trained with a particular manufacturer before becoming OLEV registered? Just wondering if anyone has experience with EV charging points and which brand they would recommend for home use?
Cheers
Spynage
I stupidly cut a melted plug off a 10A plug in charger today as is was completely melted only to find it has six wires in it, I take it they are current sensors so it is now game over
Looking at installing 2x double EV charger units in an underground car park each unit requires 64A supplies, the nearest fuseboard is roughly 120m away
What would be the best option, installing a local DB near the chargers and running 2x smaller SWA's to the units or installing 2x larger cables...
Hi all, am swapping a kitchen double power socket so just hoping to get clarity on the wires and also to check if the new one having USB charged slots makes it any more complicated/incompatible. Much appreciated.
I’ve uploaded pics of existing socket with wiring in place and the front and rear...
No doubt been done to death..Ive steered clear of EV charging to date..but.. scenario is block paved drive, TN-C-S, customer just wants an outside socket to plug the lead from his soon to be delivered hybrid. Undertood to be a 10A slow charger. Doesn't want the expense of a dedicated charging...
Had an email today with the results of the OLEV homecharge scheme audit, some interesting bits in the report about things found when they audited a number of installs nationally.
Apparently they audited one of mine but I have not heard which or had a letter advising of any non conformity? By the...
I have a client who’d like a cable installed in anticipation of an EV charger at some point in the future. No idea what charger it’s likely to be. Thinking of basing cable calculations based on a load of around 7.5Kw. Thoughts?
Hello
I currently run a lead acid 102A auxilliary battery under the bonnet of my Nissan Patrol for the purpose of powering a 70 litre Waeco car fridge.
I intend putting in a second auxilliary battery (AGM type 130A) in the rear of my Patrol to get some more life out of the fridge.
The current...
When I plug my MacBook Pro charger into the extension lead I noticed I can see it spark through the Extension lead plastic which I thought was a bit odd I also noticed today that the plug pins are burnt.
I tried the charger in other extension leads and it does not happen also tried other...
cctvtobeornottobe
Thread
burnt
charger
extension
extension lead
lead
plug
plugged
when
Hi guys,
Not long on the OLEV register.
Just wondering how you guys price your work.
Do you just quote by taking in to account and passing the £500 grant on to the customer?
Is this, then the same invoice you submit to OLEV?
Do you itemise the grant separately for the customer?
Just...
Hi Guys,
Completed an EV charging course a few months back. Looking to explore that growing corner of the market. My Megger 1720 multi function tester packed up recently. Always pretty happy with my Megger, but I'm looking to get a tester that has integrated EV testing and comes with its own EV...
Green-Bolt
Thread
best
certification
charger
charging
company
compatible
ev charging
function
multi
tester
testing
unit
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc