Hi,
was as after some advice in regards to working towards my HNC and hopefully hnd and then degree in an electrical discipline. I've posted on here a few times before but just to give a quick background:-
6 months experience in the industry
about to complete NVQ level 3 portfolio to become...
Hectorhill
Thread
courses
degrees
electrical
engineer
engineering
experience
further
looking
module
salary
students
study
Does anyone have the 2365 Level 3 Drawings on a pdf file they could share with me? My college have been re-using old ones and the quality is horrendous, they have probably just been printing copies of copies. They are not very good when it comes to computers and won't give me access to walled...
Hi All.
Does anyone here have experience with the following.
Contactor is buzzing loudly when energised. The contactor is feeding banks of LED light banks. Do you know if LED lights have to be de-rated for use with contactors?
Thanks
Bmw 318i E46 yr 2000. Existing box burnt out. Don't know why ? Got a second hand one same spec. And no. Easy to fit, but hesitant in case problem happens again. Any advice would be great.
Cheers Davee46
Evening guys...
Anyone come up against a company called Project Solar.
They are selling this Evolution+10 panel which the salesman is saying will earn £5000 more than any "german panel"
Apparently they are able to install them as 250 watt panels but do a pv estimate on 262 watt panels because...
Hi people
Does any one include module efficiency when working out kWh/yr generation.
We never have, and wasn't sure how to include it in the MCS calcs.
I ask, as a competitor as quote a much higher generation total then we have for the same 35kWp, and the only difference I can see is they...
Hi guys, i am not sure if i am posting in the right theme, however, can anyone explain why the pv modules can withstand 15A backfeed current? (for example). What determines these 15 A, what part of the pv module blocks the current to 15 amps?
Hi guys, i just bought a over voltage mcb model eaton pop270 together with a 2pole main switch and would like to verify how to connect it? basically the over voltage mcb connects mechanically to the main switch and trips when the incomer exceeds 230v obviously there is some tolerance. thanks
Hi, just got a couple of 3m led strips to go up each side of a customers stairs, but they aren't the ones with the hard gel covering (I didn't realise when purchasing), question is are they safe to install as they are or would someone get a shock off them if the touched the positive and neg bits...
Hi
I need a module to fit behind a MK logic faceplate, that dims Megaman 6w LED spots.
I've
4 x 6w LEDs
5 x 6w LEDs
Whatever the electrician fitted stopped working after a few days. The standard MK dimmer module worked much better, though it did buzz.
Be grateful for some...
rossyl
Thread
attach
dimmable
dimmer
led
leds
module
recommendations
varilight
Had a call and the following email from a friend in installing in the Weymouth area called out to a property today. We are a fair bit further to the West and have also had to repair a system done by this company (now bust).
So how do you get hold of an obsolete module from an obsolete...
Hi,
I have recently moved into a new house with a Deltabell Dummy Box which is totally useless because at night it is not lit up like the full alarm systems around the estate. If I were to buy a complete Detlabell Plus Lightbox and supply it with a 12v supply, will it replicate a full alarm...
Just out of interest has anyone done or know of any training of the plc nature close to Cambridgeshire?
I obviously want to start basic and I want to learn basic fault finding on plc's?
Cheers lads
I've been down the local wholesalers tonight and wanted to buy a small light with a sensor/pir built in. Nothing spectacular, so he starts talking about a High Frequency Sensor Module to put in a Knightsbridge opal bulkhead, it uses microwaves. It was late In the day so I agreed to take it. Now...
We have a system installed ~2006 with 8 x 130W modules on a single pole mounting structure made by Unirac. We are now looking to expand the system, but I'm struggling to find anyone who can supply a similar (or identical) mounting system which would hold 6 ~260W modules. Wind and Sun can do a...
Hello I have just installed a MK Grid switch (6 gang) and one of the modules is a dimmer switch.
I have 12 down lighters on it and they all have dimmerble 5w LED lamps in them.
When I power up, the dimmer switch buzzes and the lights flicker and don't dim smoothly, they get brighter and then...
Evening guys, I'm checking a lot of EM lighting for a client, that they have informed me are not working. They are non-maintained and are recessed down lighters with a PL 26W CFL. I only scratched the surface this afternoon. The two I checked today appear to be the EM lighting module which is an...
good evening Ladies and Gents.
A, lets say, 'friend of mine' has fitted a 25mm 1g box to house three grid modules (Two LED dimmers and a standard switch), the crazy dude thought he had seen a 3 module grid set up somewhere so never thought to check it out during first fix !!
However, my...
Hi, I was wondering if anyone could share their knowledge in removing a module that is surrounded by many others on a roof. There is adequate roof access & mansafe points to harness to but it was more the electrical safety issues relating to isolation & removing a row of panels to access the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.