Just set up a Hikvision NVR and cameras for a customer. All fine except the Hik Connect app says the cameras are offline unless you are connected to the house network. Ie it won’t work on 4g or another Wi-fi/network.
I’m sure I didn’t have this problem last time I set one of these up. A while...
Possible job coming up where customer wants wall lights in a fully tiled bathroom. Backs onto cloakroom, so they dont mind cable routed through partition on cloakroom side.
Bathroom switch is regular wall mounted 1 gang 1 way for ceiling fitting. (neutral in back box) but too far away from the...
Advice needed please - Got a job where the client wants his garage lights and driveways lights on the same key fob as electric gates and garage door.
Anybody know of a product that would allow a single key fob with 4 switches to operate each of these? 2 of the switches would be at one end of...
friends i want make one circuit which can give me auto rf remote keypad press i iwill solder keypadd pins to circuit for connection blinks .5ms this circuit must be 220v direclty or with adaptor 12volts if any one can help me guide me please
this is example attachment of rf remote with 4...
Hey all, thanks for having me.
I'm fitting a GPS tracking system into my van (Renault Trafic 2005, 1.9l Dci) and I'm trying to install the imobilisation feature. Once wired in it will let me remotely disable the fuel pump.
However, I'm struggling to get any information on the wiring of the...
I just moved in and had rooms prewired for fans. There are two switches on wall. My new fan has remote controlling fan and light. I removed ceiling fixture which had two bulbs. From ceiling are two sets of black and white wires and on set had ground. My fan only had one black and one white and...
We just moved to a new house and there are few projects I'd like to do.
There are 5 external PIR security lights, 3 at the back and 2 at the front, neither of them have override swiches they are all wired directly to the ring up in the loft consequently when we're out in the garden we need to...
Ive had my old kitchen removed and knocked through to make a larger dining room. The problem is the room has two lights both controlled by a different switch on opposite sides of the room. The electrician was unable to do this by wiring in the traditional manner due to a tiled bathroom floor...
Looking for some advice,
I live in a smallholding situated on a bend in the road, so driving out is a bit fraught. I would like to fit a camera on the other side of the road where it can see round the bend. Ideally I would like to phone it up to wake it up, it would then transmit a picture to my...
I have recently been to a property and for love nor money couldnt find the consumer unit in the 1 bed flat. I eventually found out that it is in the cellar below the shop next door.
Now my question is about the location of said unit.
I have looked into it briefly and there doesn't seem to be...
Hi guys
This may sound a strange request but the light switch in the garage in our new house is in a stupid position, hidden behind racking and nowhere near the door, so we really struggle to reach to it.
At some stage we will move it but we've got loads of other work to do in the house so I'm...
Hey I'm looking to install some garden lighting, has Anybody installed one of these before, only 13a total current so looking to possibly install a fused spur off the ring circuit and then install this outside as it's ip66?
Hi,
Could you please offer a bit of advice regarding the following:
We currently have a ceiling rose which is connected to a wall switch and Pull switch i.e. 2 way switching in the old colours. I understand how everything is connected, but, we are replacing the ceiling rose with a remote...
I have a 2013 Passat SEL Premium that had a digital OEM backup camera. Had to replace the head unit with aftermarket and tried a digital to analog converter for the oem camera and it didn’t work. Have 3 wires from the OEM camera. Solid power (red), reverse remote signal wire (blue) and ground...
Hi, some days ago my TV remote (Toshiba) stopped working magically. If I'm looking through the camera of The Phone, I can see the IR sensor flashing constantly, WITHOUT pushing any Buttton. I soldered a different IR Led and condenser but it still constantly flashes. I don't know what I could do...
Hi All. I have Honeywell Remote Servicing Suite V6, I can connect to the Galaxy Dimension 48 and panel I want to work with, but I can't do anything more as the panel has software V7.03 and the RSS software only supports up to V6.99 :( Is there an update for the software to allow it to work with...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.