6mm to kitchen.
Separate hob and oven. Rating combined just under 13000w
Am I right in applying diversity and the two appliances sharing the same supply.
45a dp switch off to two ccu's
32amp mcb 60898
6mm supply cable
T.i.a
Hello everyone,
I was wake by a friend to have a look at an Eicr that was done on his rental property .
The Eicr says I quote :
"Due to the c2 codes listed in section k , this report is unsatisfactory. The old consumer unit has type 4 (D) breakers where make it impossible to achieve test...
I'd would like to know if/how to turn on a second device (220V fan) when another device starts working automatically (air compressor).
The idea is to have both always plugged to the electricity, but the fan working only when the air compressor kicks in. Could someone guide me how to do it...
Just started my second year as an apprentice spark, was just wondering what your guys thoughts are on this, at college I do kinda struggle with the electrical science part of the course, I have the basics such as cable calf and ohms law knowledge but things such as bridge rectifiers and...
I'm looking for the section in my on-site guide that covers disconnect times for circuits over 32a. In my regs class my homework features a circuit with a type B 45a RCD.
EDIT: oops never mind I now see it says anything exceeding 32a must not be more than 1 second.
I thought there was a more...
Going to buy this Fluke MFT 1652b from someone on eBay, can anyone tell me if this is a good tester can't find it can only find the C version or 1653
I know flukes a good brand and the person has looked after it very well
I am going to pay around £310 all in all is this a decent price?
Does anyone know why manufacturer's instructions would state not to have more than one fitting on the circuit? These are customer supplied "frog eye" external floodlights, each fitting has 2, 20W eyes.
We weren't aware of this instruction and fitted the two fittings on one radial, the second...
Hi
I have an old peoples home that I do work for, called out to black out. The main fuse blown, holder pretty well cooked. DNO have replaced cut out and installed a voltage recorder which is showing several spikes around meal times which are approaching or exceeding the 80A main fuse. Opinions...
Just finishing training and about to take exams. Have years of experience but formalising for part P.
So whats the best low cost starting out it.
I'd love a megger 1720 but can't stretch to that. So what do people suggest?
3 1.5KW single phase motors 35uF CBB60 capacitors with stud to chassis.
The chassis is a 150L air receiver.
Chassis isolated by plastic wheels.
With all three motors running, the potential difference was metered between the chassis and a supply socket earth pin.
I watched the voltage rise...
Hey all, so I'm rewiring a nightmare house while girl still living in it ! Plumber gets a cylinder and says direct 1 X 3kW standard immersion. So I run a 2.5 through most of house to loft.. Comes today saying just worked out he got wrong cylinder and where he wants it there is no space for vert...
Just been asked to look at a flat (letting agency) where the supplier has refused to install a smart meter due to issues with the cable from the meter to the installation. The cable looks very poorly secured, there is exposed N with the covering tape used loose plus it is a little over 3m...
Hi all, I would like to put a second earthing rod at a garage that is a little remote from the house, so as well a using the house earthing the garage would have the second rod, this would also add a second earthing route for the house, Is this permissible and can anyone see any problems...
Picked up an eBay police siren to replace my stock horn. It has 5 different tones but I only wanted the air horn sound so I glued that button down and hid the controller. I cut the stock horn wires and plugged them straight into the siren so when I hit the horn it powers the siren and since the...
Tom Oldfield
Thread
button
ebay
police
second
siren
sound
stock
wiring
Anyone had problems with these rcds? Control Gear Direct, 30mA, 63A 2 pole..
I recently bought two 10-way dual rcd boards from denmans.. first one had an rcd which didnt trip on test button, even with load removed. Second rcd didnt trip under 300mS, but button worked.
Swapped them for the...
Hi
I am a property developer currently doing a development of some flats.
The contractor was to provide first fix electrics. He is saying this doesnt include the mother board and all the bit within it (I am not sure of the technical terms). but it seems to me that a mother board should be...
dandalion
Thread
board
cables
don't
first
first fix
flats
secondsecond fix
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.