Discuss 1 meter Sky Dish in the FreeSat, Sky, VirginMedia Forum area at ElectriciansForums.net

sjhall

-
Reaction score
76
Hi Lads, I'm new to motorised sat dishes, I'm hoping to put a 1 meter dish on the back of my house, I've been given a little advice off one of my customers, he is advising on what box to buy and what sats to subscribe to... One thing he did say is I'd need to get someone in to position the dish at a cost of around £100 ... How hard is it to position ? Any of you lads know where I can get a tripod stand as I'm planning on having the dish on the flat roof of the dorma on my house..

Cheers
 
If you wanted to ... but so, so many also broadcast in English. Also most film channels are in English. There are also loads of **** channels to choose from, and i dont think you need that to be in English ?? lol
 
1m Satellite dishes need to be mounted to thicker, stronger, satellite poles with large,

T & K brackets.

In a violent storm they will generate very large torsional forces powerful enough to take

the pole and dish down.

Smaller satellite dishes are far less affected by the wind.

Aluminium dishes are preferable to steel, as they are far lighter and last longer.
 
Last edited:

Reply to 1 meter Sky Dish in the FreeSat, Sky, VirginMedia Forum area at ElectriciansForums.net

Similar Threads

Hi everyone, a landlord is converting a house into two flats and wants a separate consumer unit for both flats upstairs and downstairs. He also...
Replies
13
Views
1K
Hi, need some advice, I moved over from Sse in 2020 to Octpus energy. Whilst I was with SSE I was on E10 when I went over to octopus they put me...
Replies
1
Views
474
Hello everyone In September 2023 I rented a beautiful 3 bedroom apartment, with all electric supply, no gas powered appliances. I noted down the...
Replies
16
Views
2K
Hi All, I have a client who is developing a plot of land for a single house. Currently, their 100 amp service cut-out is in a cubicle fed by...
Replies
7
Views
1K
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock