A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign | Page 35 | on ElectriciansForums

Discuss A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign in the Talk Electrician area at ElectriciansForums.net

A demo? that is a valid idea and a new one too. Let's see i will definitely try this.

Any more suggestions??
 
Hi all,

Just started posting on this forum but interesting reading about this, I have seen these at the old folks home where a relative is staying.

Rob
 
Thanks to forum members here for continuing to spread the word. I just found this thread on MumsNet which includes a testimony describing personal experience of inverted insertion, see 4[SUP]th[/SUP] post:

baby proofing power points- current advice? | Mumsnet Discussion

It is always useful to see a reminder that this concern is not something theoretical, but that small children are perfectly capable of using socket covers in this way.


A later post (dated: Sat 08-Nov-14 15:53) in the same thread by the same poster, NannyR, also makes reference to extension leads allowing the inverted insertion of regular plugs, which is the result of a loophole in BS 1363 described here:

Other Electrical Dangers
 
Thank you very much for your email. We will certainly take your comment on board when we next revise the leaflets. We run all of our electrical safety advice past Electrical Safety First, so we will raise this with them.

Well that was quicker than expected, now if only 'Electrical safety first' was not still advising the use of the poxy things I'd of been happy
 
Showed this site to one mum and she said it is all faked and I'm just trying to make money out of her!! How the hell do you make money out of showing someone a site that tells you not to buy something thereby saving money!! There are people out there who should not breed
 
Found out on Monday that the nursery where the missus workes have these stupid covers fitted. Apparently they where advised to have them fitted. She doesn't know who by thought. Anyhow I sent them an email telling them that they need to remove them A.S.A.P. and attached the link to the FatallyFlawed site. Hopefully they will do the right thing and bin them.
I'm going to print the PDF off as well and ask if they are willing to hand them out to parents... or just stick them somewhere and let parents pick on up.
 
Just an update: It would appear that my advice was ignored and the covers are still fitted..... As the saying goes, "You can lead a horse to water...."
 
I cant believe these are still being sold and used all over the place after reading this again the other day I posted it on my face book page and already there are a few mothers removing them from their use and I contacted my local newspaper were I am going next week where they have agreed to run an article the following week so I will keep you posted on my attempts to get these banned in my area at least !! Rome wasn't built in a day but it was built we just have to show the same strength of caricature !!
 
Totally agree that they are a waste of space and a danger. My only concern at recommending they are removed is that if the shutter mechanism has been damaged, just removing the 'safety cover' could leave the live contacts unprotected or compromised? Any advice on this please? Thanks.
 
Totally agree that they are a waste of space and a danger. My only concern at recommending they are removed is that if the shutter mechanism has been damaged, just removing the 'safety cover' could leave the live contacts unprotected or compromised? Any advice on this please? Thanks.

Hi Trickyd. If the socket stutter is damaged then just replace the socket with a new one. When removing the 'covers' just check to see that they are operate properly.
 
the thing is im not against them if they are well designed and you cannot put them in the wrong way and open the shutters.

would any of you complain if they changed them so the earth pin wasnt long enough to open the shutter?

at the moment most just circumvent the built in protection aka the built in shutters.
 

Reply to A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign in the Talk Electrician area at ElectriciansForums.net

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top