A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign | Page 36 | on ElectriciansForums

Discuss A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign in the Talk Electrician area at ElectriciansForums.net

The sockets are shuttered already though. They don't add any benefit. Daz
 
They are not needed shanky, simple as that. Its a bit like teaching women to wash up, no need, its already in their genes... :)
 
would any of you complain if they changed them so the earth pin wasnt long enough to open the shutter? at the moment most just circumvent the built in protection aka the built in shutters.

The only things which are safe to plug into sockets are those which have the exact dimensions of a real plug, as specified in BS 1363. There are NO socket covers which do!

Shanky, if the earth pin is too short to open the shutters, then you could not put the damn thing in anyway, except that there are people out there who so stupid they would use a hammer! There are Amazon reviews of the Clippasafe cover, which has an odd pointed "earth pin", which say that it is OK providing you "push strongly" and that you have to "hammer them in".

I think that you are also forgetting that opening by the earth pin alone is just one method in use, for many years MK sockets were opened by the line and neutral pins only, and modern MK Logic Plus sockets require all three pins to be inserted simultaneously. Both Legrand and Hager make sockets which also require all three (correctly sized and shaped) pins to open the shutters (all three manufacturers using different a patented designs). All these are fully consistent with the standard.

A shutter being opened by an inverted cover is just one of the things which make the dangerous, it is important to remember that socket covers also damage socket contacts, and, if "hammered in", smash the shutters.
 
For those who would like to distribute information to customer's etc, there are some new leaflets/posters published by Barnardo's, the UK’s leading children’s charity. You can find these, along with our own FatallyFlawed fact sheets, on our Fact Sheets page.

[ElectriciansForums.net] A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign
 
It is realy scary how people react when you ask them about this I do every time I see them " why do you have that there?" get the normal responces WHY are they still on sale ffs
 
As an Amazon Associate Electricians Forums may earn a small commission from qualifying purchases.
I returned to this after many years and found them still on Amazon and this thread worryingly quiet. Time to revive it! Come one guys, start banging the drum again! I just posted a review there and will look for some similar products to review and start spreading the warnings again.
Thanks for bringing this issue back to the forefront.

I still notice them subconsciously wherever I go, but admitting i don't say anything to the management of these places.

You would think after the 11 years this thread has been active, thee would have been movements from the powers that be to ban the sale of them??
 
I noticed these items installed in many sockets in my local health club. I spoke to a member of the reception team who promised to tell the management.
Subsequently I saw the covers had been removed. I'm wondering if that was just local action or if the other clubs in the chain have removed them too.
 
I always make a note ( in red ) on an EICR if they are being used and put a link to the fatalyflawed website in the note in the hope it will discourage there use

Groups like Electrical Safety First and BSI should be doing more to stop their use and more importantly manufacture IMO
 
I still tell people not to use them whenever I see them.
Got my kids school, after school club & dentist to remove them. I printed off the FatallyFlawed sheet and gave it to them along with other info.
I haven't seen any in a bit, but them I work in an office and I'm ant-social. 🤣
Good to see that people are still thinking about these stupid covers.
 
In general, still duping the public, though.....in that some are still making money out of manufacture and sales.
I don't think FatallyFlawed are having much effect on Amazon, for instance.
Obviously, not through lack of trying.
Although, just been going through some of the 'comments from customers' on Amazon....I've yet to find one later that 2016, so here's hoping.
 

Reply to A reminder to everyone - FatallyFlawed - Child Plug Socket Covers Campaign in the Talk Electrician area at ElectriciansForums.net

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top