• IMPORTANT: Please note that nobody on this forum should be seeking from or providing advice to those who are not competent and / or trained and qualified in their field (local laws permitting). There is a discussion thread on this global industry-wide matter HERE. This also has more information about the warning with regards to sharing electrical advice in some countries. By using this forum you do so in agreement to this.
  • Please checkout this (ad-free) update post I've done on a spare blog. Feel free to bookmark it and check everynow and again for update if ads are pissing you off. Always feel free to ad-block them for now though if you want. I'll let you know when you can disable the ad blocker again, only if you want to see the ads. They should look nice and neat in the end.

Discuss Additional gang meter socket in the American Professional Electrical Advice Forum area at ElectriciansForums.net

Reaction score
0
Can I add a 2 gang meter socket on the other side of the building and to know If the supply line use as distribution for new gang?
 

Attachments

  • Additional gang meter socket IMG_20221104_190600 - EletriciansForums.net
    IMG_20221104_190600.jpg
    162.1 KB · Views: 5

Reply to Additional gang meter socket in the American Professional Electrical Advice Forum area at ElectriciansForums.net

Similar Threads

  • Question
Hello everyone, We had an electrician over, who fitted a 40a MCB in the house consumer unit to supply a new build garage. It's underground SWA...
Replies
14
Views
437
  • Question
Hello to all, I have property with av2 gang meter socket, the lower unit was connected to the attic but is is now disconnected. What would be best...
Replies
2
Views
595
  • Question
One client asking me to replace two one gang existing RJ45 data socket . One of them have to replaced with 4 gang and another one gang replace...
Replies
2
Views
1K
Hi, I swapped a 2 gang switched socket for a 2 gang switchless socket with usb ports downstairs. I switched off all the power to the house by...
Replies
8
Views
336
Looking for a metal pattress with screw fittings in the correct place for this old MK 2 gang socket. The existing pattress of the socket that I...
Replies
20
Views
2K

New Posts (Please Reply)

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Top