Advice ref blinking lights all circuits

[Toneyz]

The OP had the DNO out to data log so that would and should have picked up something supply side.

Would a data logger pick up a blink/flicker like this? My instinct tells me a slightly loose connection.

 

[Kjr79]

It’s a flash as opposed to a flicker, and all the connections have been tightened including the manufacture fitted?

 

[Rpa07]

Would a data logger pick up a blink/flicker like this? My instinct tells me a slightly loose connection.

I don’t know but I’d like to think so as a diagnostic tool. Maybe a member has experienced the positive that a data logger produces.
Until we can all get there and wiggle and tighten we’ll have to hang fire until we get an update!

 

[Kjr79]

could you take the cover off the board and take a pic of everything including the meter?

 

[telectrix]

May The Power of Laugh Be With You,

Where did you dig that one up from?

tinternet. it's a marvellous tool.

 

[jwg]

I've skim-read the thread so sorry if this has been asked - did the flickering happen at any point while the data logger was connected?

 

[DPG]

I'd have a bit more of an in depth read if I were you

 

[jwg]

I'd have a bit more of an in depth read if I were you

Would you now? I can't see that my question has been answered. "They say that there is no fluctuations from their side that would cause “flicker” so have said it’s not an issue from their end." certainly doesn't answer it if that's what you were thinking.

 

[DPG]

Mmm. The point I was making is that as far as I know, nobody has connected a data logger yet.

 

[BOYD BARKLEY]

Mmm. The point I was making is that as far as I know, nobody has connected a data logger yet.

Do we know if anyone has connected a simple solitary circuit to the out put side of the c.u. with nothing else connected