Discuss C/U change with housing Association in the Australia area at ElectriciansForums.net

Does the house have dado trunking? Or alternatively trace the path of the cable and then check the skirting if a nail is in the path of the cable.
 
if you changed the c/u then you should be prepared/able to rectify faults, otherwise you shouldnt of changed it in the first place


yes i am able to sort this problem out. and i am going so. but my point to it was gettin the green light from the housing association this house is a can of warms.....cable after cable is extended on connector blocks...(which is the fault) ive even found sockets in the house to have the lives of the ring put into a connector block and then extended with a single 6mm cable

point is how much of your own money do you spend sorting out a house someone else owns? when they should do repairs but i know they will never turn up to do it.
 
Guys: Maybe i'm being dense but if a full Pre-change installation test was done, how was an o/c CPC missed ?


how does anything brake if it worked fine before it broke? like i said all the circuits hvbe been extended at some point with connector blocks and J/B's.

the wiring is that old that in places we still have aluminium conductors!
 
point is how much of your own money do you spend sorting out a house someone else owns? when they should do repairs but i know they will never turn up to do it.

none mate,if the house is that bad,i wouldnt even pay them rent,but theres 2 sides to a story.id have thought the heating and mould would be the priority not replacing the cu
 
ive sealed the mould in with PVC and and keep trying with the heating. the only reason ive changed the cu is for an assessment.

people on here seem to be jumping on my back saying im not competent to do the work but i think its all down to the fact i dont speak in sparky lingo or explain my actions the right way.

the only issue ive got with the house and the work i need to do is.... permission...time and money (im on the dole at the moment)

so if i'm giving people the wrong impression about me because i dont explain things then i apologise.
 

Reply to C/U change with housing Association in the Australia area at ElectriciansForums.net

Similar Threads

I was at a customers house changing a socket and they asked me a question about their lights. Some of the lights in the house suddenly get...
Replies
4
Views
723
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit. This is not used...
Replies
17
Views
856
  • Question
Hi - Just joined the forum as I'm making a career change and am training up. I've come across some mock papers online and am concerned that...
Replies
7
Views
496
Hello All and happy new year. Over the holiay I have changed all of my old sockets to some nice new ones and added a couple with usb sockets for...
Replies
4
Views
834
Hi Guys After bit of advice please as we don't do much data normally, tend to sub it out. Had garden building this week which we'd run in SWA...
Replies
9
Views
419

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock