- Reaction score
- 185
Thank you for your correction Paul.
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Cables and trunking in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 2,602
Do you have any reference for this, Paul? I would have thought that for some applications, trunking would be quite good protection.
OP
Swicade
I always use trunking in cupboards...not because of any regulation though just because i hate clipping direct as i personaly think it looks terrible.
Reply to Cables and trunking in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Is anyone aware of any galv trunking that is smaller than 50x50. I'm drawing a blank online.
I've taken over a job that's used 16mm twin and earth...
I have had my kitchen rewired and plastered. I have had a 6mm t+e on a dedicated 32a circuit for a 60cm electric cooker. In hindsight, had i known...
Hello All. I'm quite new to this game and gaining experience, but going well in the main.
My customer wants to feed a Hob ( on island in centre...
Hi,
I have a book on domestic wiring which says that everywhere there is a change in current carrying capacity along a circuit there must be some...
Hi All
I was having a discussion with my colleague regarding burying a swa directly along with a pvc earth cable.
As the earth is not an armoured...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Does a SPD need a dedicated MCB?If this is for outside charger and it doesn't incorporate open PEN protection you need to put...- Latest: westward10
-
Good Morning Thread - Come say good morning, tell us what you've got on today. :)Followed by two 'how the episodes were made' on BBC 3, for those who aren't interested in the...
- Latest: brianmoooore
-
Fuel Gauge needle moving with revs issueYes, the fuel gauge is fed by AC, and the diode keeps the current going one way. There is a low...
- Latest: Tarlow
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.