Discuss Difficult customers - and remedial works in the UK Electrical Forum area at ElectriciansForums.net

We had a claim a few years back for a knackered landing carpet, edge got frayed when we lifted. We stretched it back and it wasn't noticeable but customer was informed anyway.
Customer wanted it replacing, I said get a quote and I'll cover it.

Elecsa have a Standard Contract document which is pretty good - has this section in - "Where carpet or flooring coverings may require lifting to allow concealed installation work, no charge is made for this service, with best endeavours being made to avoid damaging them and to refit them to an acceptable standard. However, consideration of employing a specialist fitter may be prudent, at your cost to effect a fully satisfactory reinstatement."
 
I have seen that and I do have a similar get out clause on my quotes.
However this was for a contract who bows down to every customers wish and command but they only settle their own claims when damage is done by one of their employees.
 
Elecsa have a Standard Contract document which is pretty good - has this section in - "Where carpet or flooring coverings may require lifting to allow concealed installation work, no charge is made for this service, with best endeavours being made to avoid damaging them and to refit them to an acceptable standard. However, consideration of employing a specialist fitter may be prudent, at your cost to effect a fully satisfactory reinstatement."

My old man used to be a plumber and blankly refused to move any furniture or lift floor coverings to do work, this was after he and a mate moved a mini grand piano once and the back leg fell off Laurel and Hardy style:)
 
My old man used to be a plumber and blankly refused to move any furniture or lift floor coverings to do work, this was after he and a mate moved a mini grand piano once and the back leg fell off Laurel and Hardy style:)
Those old MFI wardrobes and furniture were a definite no no for me.
 
with heavy or awkward furniture, it's customer gets it moved at their own risk . if the want to get mr. shifter involved, it's their choice,

GD179117.jpg
 
Not sure if your been serious? But I did a job and a pump failed over the weekend, I had to get my mate in to swap it and pay him for his time because I was working elsewhere, my customer then told me to send her the bill for changing my faulty pump! I said no chance love it's under warranty and it's my problem not yours!
 
Not sure if your been serious? But I did a job and a pump failed over the weekend, I had to get my mate in to swap it and pay him for his time because I was working elsewhere, my customer then told me to send her the bill for changing my faulty pump! I said no chance love it's under warranty and it's my problem not yours!

Oh right fair enough. Thanks for clearing it up.

I wasn't being smart - I genuinely didn't understand your original post.
 
A lot of the old time customers were like that up here . The money was on the mantle piece before the job was even started, and a place laid at the table at lunch time .
There are some left , but few and far between.

My grandparents were farmers. My nanny would feed the men at lunch time and also feed them their tea before they went home, their money was "hid" in a bale of hay out in the shed. Everyone knew where the money was hid but due to decency and respect they were never robbed. They would have been easy targets looking back on it. My granda was a cattle dealer who carried a roll of a couple of thousand in his pocket all the time in case a eeal ever had to be done.

It wouldn't be like that now.
 

Reply to Difficult customers - and remedial works in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi all. Sort of an interesting one. I had a call from a client to say she is getting a shock when using the shower. I told her not to use it and...
Replies
15
Views
2K
This drives me round the twist, the client tells you what they want, kind of. you do the work the way the client asks you to and then when its all...
Replies
13
Views
2K
I was asked to see why a set of sockets weren’t working in the house (which appear to be a ring circuit based on breakers) There was no power on...
Replies
27
Views
1K
Hello there my fellow electrician. Need some advice about a customer who is being very difficult and annoying. I was called out by the customer...
Replies
36
Views
4K
Hi all, Just wondering what the general situation is with other people on smaller jobs, do you give a quote or estimate to the client before you...
Replies
6
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top